CTAn history legend: 
*	updated functionality
+	added functionality
-	bug fixes
	added/updated functionality (only for Version+)

Version 1.25
____________________________________________________________________________________________________

[1.25.0.0]
-	added the <Log> button on the <16 to 8 bit> dialog. For fast switch is available also Alt+L key shortcut.
-	added the "Phi/Theta, Number per index" table at the output of <Local orientation/3D space/Sphere section> plug-in.

Version 1.24
____________________________________________________________________________________________________

[1.24.0.0]
-	fixed bug of the <Morphological operations/Watershed separation> plug-in: wrong reporting of the tolerance value.

Version 1.23
____________________________________________________________________________________________________

[1.23.2.0]
+	<3D analysis>: enabled option to save Medial axis 

[1.23.1.0]
*	splited the output line of anisotropy parameter "DA" in <3D Analysis> to two lines.
*	changed the output folder name from "MA" to "MA(obj)"/"MA(sp)".
 
[1.23.0.2]
*	small impprovements

[1.23.0.1]
-	fixed incorrect working of the <Center align> check-box of the <ROI size> dialog.
*	increased limits of the <ROI size> dialog.

[1.23.0.0]
+	(BatMan): added minimizing button to the BatMan window.
+	(CTAn/BatMan): added the <Preferences/Region of Interest/Auto-load ROI> check-box. The <pathname_prefix>.roi file will be opened in the case of presence.

Version 1.22
____________________________________________________________________________________________________

[1.22.3.0]
-	removed trial code forgotted in the vv.1.22.0-1.22.2.

[1.22.2.0]
+	added the optional possibility to have the permanent location of the single license file.

[1.22.1.0]
-	fixed issue of the <Save dataset from ROI>: size of images does not change to accumulated ROI bounds when the image ROI used.

[1.22.0.0]
*	updated the reading of float point TIFF-files.
-	fixed loading issue of several VFF-files.
-	fixed missing of several DICOM-file tags.	

Version 1.21
____________________________________________________________________________________________________

[1.21.2.0]
*	removed the limitation of attenuation coefficients within positive values only.

[1.21.1.0]
-	fixed issue of the <Save dataset from ROI> dialog: re-popupping error window.
-	fixed bug of the <Despeckle/2D> plug-in: the number of removed speckles shown always as 0 in the log-file.

[1.21.0.2]
*	increased the maximum of the <ROI shrink-wrap/Diameter> from 100 to 256.

[1.21.0.1]
-	fixed small issue of <Compositing/Inside VOI> plug-in.

[1.21.0.0]
+	<Compositing> plug-in: added the check-box <Inside VOI>.
+	added the <Range> field on the VOI selection dialog.

Version 1.20
____________________________________________________________________________________________________
[1.20.8.1]
-	fixed bug of the <Thresholding/Hysteresis> plug-in: wrong threshold levels are applying in the some cases.

[1.20.8.0]
-	fixed issue: some output text files can contain extra "new line" character at the end of each line.
*	enabled the tooltips for sliders (position,range selection, threshold levels, color selections...). 
+	<Histogram> window: added the possibility to change preview of the third column of histogram table between the "Area/Volume" and the "Count" by the clicking on the header of column.

[1.20.7.0]
-	fixed issue: image not loaded correctly from the 16-bit DICOM file having 8-bit stored data.

[1.20.6.0]
-	fixed bug of the vv. 1.19.3-1.20.5: the <Despeckle> plug-in does not remove speckles in the some cases. 

[1.20.5.0]
-	fixed bug of the <Filtering/Anisotropic diffusion> plug-in: a wrong automactic integration constant used in the <Preview> mode.

[1.20.4.0]
-	fixed bug: The <Image> menu commands <Above> and <Below> are not active outside of the VOI selection.
-	fixed bug of <Despeckle> plug-in: the <Input image must be black/white> message appears when the image is grayscale but the plus-in takes the black/white ROI as an input.
+	added the <Retain only VOI> option to the <Despeckle> plug-in. What it does:
	First of all it clears target <Image> or <Region of Interest< data outside of vertical selection of VOI (can be applied to grayscale or blask/white);
	Secondary, if taget is the <Image> (grayscale or blask/white) and the ROI is black/white then the ROI applied to the <Image>.

[1.20.3.0]
-	fixed bug of vv. 1.20.1, 1.20.2 in the <Bitwise operations> plug-in.

[1.20.2.0]
-	fixed bug of vv.1.19.12-1.20.1: program crashing when the <3D Analysis> started at the <Morphometry> page.

[1.20.1.0]
+	<Bitwise operations> plug-in: added the <Preview> and the <Restore> buttons. 
+	<Arithmetical operations> plug-in: added the <Preview> and the <Restore> buttons. 

[1.20.0.0]
+	<Local orientation (2D)> plug-in: added the <Preview> and the <Restore> buttons.

Version 1.19
____________________________________________________________________________________________________
[1.19.12.0]
+	<Despeckle (2D)> plug-in: added the <Preview> and the <Restore> buttons. 
+	<Shrink-wrap (2D)> plug-in: added the <Preview> and the <Restore> buttons. 

[1.19.11.1]
-	fixed issue of docking position of the ROI toolbar.

[1.19.11.0]
-	<Thresholding> plug-in dialog: fixed issue of visibility of the <Preview> button when the <Global> thresholding is selected. 

[1.19.10.2]
-	fixed bug: sometimes the execution of the tasklist shows unexpected message "Input image must be black/white". 

[1.19.10.1]
-	fixed bug of vv.1.19.9-10: crashing while using the <Reset Window Layout> (or pressing F12).

[1.19.10.0]
-	fixed issue: program crashes when loading clipboard files with filename containing the symbol '%'. 
+	<Smoothing (2D)> plug-in: added the <Preview> and the <Restore> buttons. 
+	<Morphological operations (2D)> plug-in: added the <Preview> and the <Restore> buttons. 
	For all configuration dialogs with the preview option: the <Preview> button is visible only when the configuration options are applicable to the target image preview.
+	added the different color background for each of image preview of the <Custom processing>.
+	added the fast switching of the image preview over opened plug-in configuration dialog using the shortcuts: 
	-	<Ctrl+1> - Image view;
	-	<Ctrl+2> - Image inside ROI view;
	-	<Ctrl+3> - ROI view;
	-	<Ctrl+4> - Clipboard view;
	-	<Ctrl+Up> - Image Above;
	-	<Ctrl+Donw> - Image Below.
	-	<Ctrl+Home> - Top Image;
	-	<Ctrl+End> - Bottom Image.
*	updated the <Help/Keyboard Shortcuts...> dialog.

[1.19.9.1]
-	fixed bug of v.1.19.9.0: the <Stretch over holes> option of 2D <Shrink-wrap> plug-in does not working. 

[1.19.9.0]
+	<Custom processing>: added the shortcuts to switch the preview between:
	-	<Ctrl+1> - Image view;
	-	<Ctrl+2> - Image inside ROI view;
	-	<Ctrl+3> - ROI view;
	-	<Ctrl+4> - Clipboard view.
+	<Thresholding> plug-in: added the <Hysteresis> (2D/3D) thresholding.
+	added to the <3D analysis> dialog of the Morphometrical analysis page the possibility to save <to Subfolder> color-coded images of TBTH/TBSP.
+	<Thresholding> plug-in: added the <Output to> drop-down list with options: <Image>, <Region of Interest>.
+	<Thresholding (2D)> plug-in: added the <Preview> and the <Restore> buttons.

[1.19.8.0]
-	fixed bug of applying of several 3D-filters on bounding images. 
*	<Filtering> plug-in: the <Uniform> renamed to the <Mean>.
*	<Filtering> plug-in: the execution time of 3D versions of filters reduced by:
	-	<Gaussian blur>: ~40%;
	-	<Median>: ~40%;
	-	<Mean>: ~50%;
	-	<Unsharp mask>: ~40%;
	-	<Conditional mean>: ~50%.
*	<Thresholding> plug-in: the execution time of 3D versions of routines reduced by:
	-	<Adaptive (Median-C)>: ~40%;
	-	<Adaptive (Mean-C)>: ~50%;
	-	<Adaptive <Mid-range-C)>: ~40%.

[1.19.7.1]
- <Thresholding> plug-in: fixed bug of vv.1.19.5-1.19.7. Wrong <Background> used by the <Automatic (Quantile)> thresholding.

[1.19.7.0]
+	added the <Automatic (Triangle)> to the <Thresholding> plug-in. (http://www.mif.vu.lt/atpazinimas/dip/FIP/fip-Segmenta.html#Heading118)

[1.19.6.0]
+	added the <Automatic (Mid-range)> to the <Thresholding> plug-in.
*	<Thresholding> plug-in: the <Adaptive (mean of min and max values)> renamed to the <Adaptive (Mid-range-C)>.

[1.19.5.0]
+	added the <Automatic (Quantile)> to the <Thresholding> plug-in.
+	added the <Automatic (Mean)> to the <Thresholding> plug-in.

[1.19.4.0]
*	decreasing memory size using by the 2D versions of the <ROI shrink-wrap> and the <Morphological operations> (binary) plug-ins.
	increasing speed of the 2D versions of the <ROI shrink-wrap> and the <Morphological operations> (binary) plug-ins.
-	fixed bug of <Morphological operations/Erosion/Dilation> (binary) plug-ins: the execution progress was shown in opposit direction.
*	decreasing memory size using by the 3D version of the <Morphological operations/Erosion/Dilation> (binary) plug-in.
	increasing speed of the 3D version of the <Morphological operations/Erosion/Dilation> (binary) plug-in.
	increasing speed of the 2D/3D version of the <Morphological operations/Erosion/Dilation/Opening/Closing> (grayscale) plug-in.
*	added possibility to input the negative value of attenuation in the <Density range calibration> dialog.


[1.19.3.1]
-	<Local orientation> plug-in: fixed bug of vv.1.19.1-1.19.3 where the small part of data has been wrong classified. 
*	<Morphological operations> plug-in dialog: changed the limit of radius from 100 to 256.

[1.19.3.0]
-	fixed bug of <Individual 3D object analysis> plug-in: the random noise are shown when the <Object label> is chosen for color-coded images.
*	decreasing memory size using by the 3D versions of the <ROI shrink-wrap> and the <Morphological operations/Opening/Closing> (binary) plug-ins.
	increasing speed of the 3D versions of the <ROI shrink-wrap> and the <Morphological operations/Opening/Closing> (binary) plug-ins.
*	small increasing speed of the 3D version of the <Despeckle> and the <3D analysis/Number of objects> plug-in.

[1.19.2.0]
+	<Local orientation> plug-in: added the <Inside ROI/VOI> check-box. 
+	added reading of attenuation koefficients from Scanco ISQ-files.
-	fixed issue of flipped images of several dicom-files.  
-	fixed small memory leakage when opening dicom-files.

[1.19.1.0]
+	<Local orientation> plug-in: added the drop-down list <Type> with options: <Orientation>, <Direction of maximum variability>, <Coherency>.

[1.19.0.0]
+	added the command <Plug-Ins/Disable> for the task list

Version 1.18
____________________________________________________________________________________________________

[1.18.12.0]
+	<3D model> plug-in: added option to choose filename from: <Default>, <Custom> or <Append Suffix>.

[1.18.11.0]
-	fixed bug: the command <File/Open Containing Folder> has not action when the single multiframe file was opened.

[1.18.10.0]
-	<Local orientation> plug-in: fixed rounding issue. 

[1.18.9.0]
+	<Compositing> plug-in: added the check-box <Show image>.
-	fixed bug of incorrect drawing of profile line on zoomed image. 
*	<Preferences/Histogram/Bone Mineral Density calibration>: removed the HU calibration formula from BMD-calibration window.
+	added importing of SkyScan F4F-files.
*	fixed issue with restoring window position when the system taskbar ls locating at the lef or the top side of the screen.  

[1.18.8.0]
*	the dialog window <Preferences/Advanced> has rearranged.
	added the check-box <Preferences/Advanced/Use all processors> that available only on multi-processors systems. By the default this check-box is unselected so that the CTAn frees one processor for the system purposes.
+	added the <Compositing> plug-in that allows to create the <Axial/Coronal/Sagittal> <Maximum Intensity Projection/Shadow Projection>.

[1.18.7.0]
*	<Preferences/Histogram> : changed default setting of <Bone Mineral Density calibration against> from the <Hounsfield Units> to the <Attenuation Coefficients>. 
	This modification applied only for fresh installation of CTAn. 
*	<3D analysis> plug-in: changed naming of folders from "TBSP" and "TBTH" to "STSP" and "STTH" when <General scientific> nomenclature has selected.
-	fixed bug of <3D analysis> dialog/plug-in: value of <Connectivity density> is not changing when <Preferences/General/Unit> has changed. 

[1.18.6.0]
+	added menu command <File/Open Containing Folder>.

[1.18.5.0]
-	fixed issue: missed dialog of range selection while loading 16-bit tiff-files.
-	fixed issue with loading big-endian tiff-files.

[1.18.4.1]
+	<individual object analysis> plug-in: added possibility to choose the size of sphere section (the same as in <Local orientation> plug-in).

[1.18.4.0]
-	fixed bug of v.1.18.3.0: <Custom processing> does not recognize loaded 1-bit bmp-files when the <Preference/Advanced/Cache Images> is off.
*	now CTAn is capable to restore the maximized state after restarting.
+	added possibility to the <File open> dialog to open single file instead of full dataset by holding the <Alt> key while opening file.
+	<individual object analysis> plug-in: added the <Save to Clipboard color-coded images/Feature/Mean density>.
*	<Custom processing>: at each start of single plug-in (from <Internal> or <External> tabs) on initial data (as well as after manual dataset reloading) will be added information about dataset (the same as at begin of task) to the log file.
	It will follow the line <<<<< Begin of workflow >>>>>.
+	<individual object analysis> plug-in: added the <Rundom number> check box for the <Save to Clipboard color-coded images/Feature/Object label>.
+	<ROI shrink-wrap> plug-in: added the check-box <Trim the lumps> instead of the <"Stretch over holes> for the <Fill-out> mode.
+	<ROI shrink-wrap> plug-in: added the check-box <Remove pores> for the <Fill-out> and the <Adaptive> modes.

[1.18.3.0]
*	the <Tresholding> plug-in is not more required at the begin of the task when dataset loaded as binary (1-bit bmp-files). 
+	<individual object analysis> plug-in: added the <Save to Clipboard color-coded images/Feature/Object label>.
+	<Morphological operations> plug-in: added the <Watershed separation/Tolerance>. 
	The H-minima transofm will suppress the regional minima with dynamic intensity equal or below the tolerance value.
	The increasing of tolerance reduces the number of segments.

[1.18.2.0]
-	fixed bug of <Individual 2D object analysis>: wrong centeroid coordinates of big objects.
+	added the <Custom filename> to the <3D model> plug-in. 

[1.18.1.0]
+	added the <Local orientation> plug-in.

[1.18.0.0]
-	fixed bug: crashing when drag-n-dropping not supported DICOM-file into CTAn 
-	fixed an issue of the <Import raw data> dialog: the fields <Minor value> and <Major value> did not accepted negative values.

Version 1.17
____________________________________________________________________________________________________

[1.17.12.0]
+	added reading of 32-bit float point TIFF-files.

[1.17.11.1]
-	fixed issue of opening DICOM-file of Bruker PET scanner.

[1.17.11.0]
-	added context csv-file in folder of subsets of dataset.

[1.17.10.0]
-	fixed issue of creation of subsets of dataset.

[1.17.9.0]
-	fixed a typo of the 32-bit splash window.
-	fixed the issue of reading of the SIMENS Sensation DICOM-files. 

[1.17.8.0]
-	fixed bug: the BatMan (32-bit) does not show the splash window to warn about using a 32-bit version of program under 64-bit OS.
+	added tooltips for list controls to show full text line if it is clipped by the column.
+	added the key [/I] to the command line of the CTAn (to load bmp-images to the Clipboard).
+	added the progress bar on the CTAn/BatMAn taskbar.

....................................................................................................
[1.17.7.2]
-	(BatMan): fixed bug of data overwriting.

[1.17.7.1]
*	small cosmetic changements

[1.17.7.0]
-	fixed <Filtering> plug-in bug: overlapped dialog controls appear when selected the <Contrast Stretching> filter.  
*	<Filtering/Anisotropic diffusion> plug-in: changed the number of neighboring nodes from the 4 to the 8 (2D space) and from the 6 to the 26 (3D space).
+	<Filtering/Anisotropic diffusion> plug-in: added checkbox <User defined Integration constant>. Usually, due to numerical stability this parameter must be set to the ~0.166 for 2D space or to ~0.068 for 3D space.
	In unchecked state the optimal value of constant calculated according the configuration of neighboring nodes and z-spacing of dataset.

[1.17.6.0]
+	<Filtering> plug-in: added the <Anisotropic diffusion> smoothing filters: the <Privilege high contrast edges (Perona-Malik)> and the <Privilege wide regions (Perona-Malik)> (https://en.wikipedia.org/wiki/Anisotropic_diffusion).

[1.17.5.0]
+	added the interracton with the <pfMonitor> application.
*	changed the Euler number calculation algorithm that fixes the negative connectivity issue.
+	<Individual 3D object analysis> dialog/plug-in: added calculation of the Euler number <Eu.N> and the Connectivity <Conn>.

[1.17.4.0]
+	<Individual 3D object analysis> dialog/plug-in: added the <SCv.I/Tb.Pf> parameter.
+	added the <Preferences/General/Filename postfix length/Auto> parameter: the number of digits will be taken from log-file if it exists. Otherwise the maximum possible number of digits are using as the file postfix.

[1.17.3.0]
*	<3D analysis> dialog/plug-in: improved the algorithm of the <SCv.I/Tb.Pf> parameter.
*	<3D analysis> dialog/plug-in: the parameter <SCv.I/Tb.Pf> moved from the <Basic values> to the <Additional values> and chained with the <SMI> checkbox.
*	<3D analysis> dialog/plug-in: added the checkbox <Moments of inertia> to enable/disable output of parameters of this group.

[1.17.2.0]
-	fixed issue: the CTAn exports a tasklist file that can't be transfered to different computer in the case when tasklist contains external plug-in.

[1.17.1.0]
+	added the key [/O] (omit the checking of the dataset integrity) to the command line of the CTAn.
+	added a button to the progress dialog that allow to skip checking of the dataset integrity.

[1.17.0.0]
+	added a splash window to warn about using a 32-bit version of program under 64-bit OS.
-	fixed bug: when the *volume (direct) of object equals 1 voxel (with "mm" or "inch" as an unit) an ERL shows 1 mm/inch.

Version 1.16
____________________________________________________________________________________________________

[1.16.10.0]
-	fixed issue: closed <Palette> window appears again.

[1.16.9.0]
-	fixed a typo of the <Palette> window
_	fixed bug of v.1.16.8.0: wrong z-order of clipboard images.

[1.16.8.0]
+	added a <HU calibration> value to the <Density range calibration> dialog.
+	added the <Bruker> logo to the <About> dialog.
+	added the <Clipboard images> tab in the CTAn and the column <Clipboard> in the file-list of BatMan that show the default images for the plug-ins.
+	(CTAn): added the <Clipboard> menu with two commands: <Load clipboard> and <Reset clipboard>.
+	(BatMan): added the menu item <Load Clipboard> to the split button <Add> of dataset list.
+	(BatMan): added the menu item <Reset Clipboard> to the split button <Remove> of dataset list.
+	added <Contrast Stretching> (2D/3D) filter to the the <Filtering> plug-in (https://en.wikipedia.org/wiki/Normalization_(image_processing)).
+	added <Contrast Enhancement> (2D/3D) filter to the the <Filtering> plug-in (https://en.wikipedia.org/wiki/Histogram_equalization).

[1.16.7.0]
+	added the <Invert Z-order> option to the <Geometrical transformations> plug-in.
+	the <Comment> plug-in now shows the notes in the <Description> field of task list.
*	changed the checkboxes <Save color-coded images of ...> of the <3D analysis> plug-in by the drop-down lists which contain options <Off>, <to Subfolder> and <to Clipboard>.

[1.16.6.0]
*	(BatMan): removed button <ROI>.
+	(BatMan): added the menu item <Load ROI> to the split button <Add> of dataset list.
+	(BatMan): added the menu item <Reset ROI> to the split button <Remove> of dataset list.

[1.16.5.0]
*	(BatMan): changed the button <Add> of dataset list by the split button that contains drop-down menu.
+	(BatMan): added the <Scan folder> command to drop-down menu of the split button <Add> of dataset list. 
	This command allows to scan selected foder and first-level subfolders for datasets (contains SkyScan log-file and bmp/jpg/png images) and put them to dataset list.

....................................................................................................
[1.16.4.1]
+	added the <Primitive ROI> plug-in. It replace VOI by (or combine/intersect with VOI) one ROI located at left/right/front/back/bottom/top side of dataset.
+	added a checkbox <Pin to Collection> to the <Import task list> dialog.
+	added the checkbox <Preferences/Region of interest/Show ghost ROI while drawing>.

[1.16.4.0]
+	added the vertical shift to the <Geometrical transformations/Translate> plug-in.
*	the single text line of 3D analysis outputs the DA in both forms (as in the text table).

[1.16.3.0]
+	added the context menu to the <Custom processing/Task list> tab window.
+	added the button/command <Clear task list> to the <Plug-ins> window/menu. 
+	added checkboxes <Apply to window/Raw images> and <Apply to window/Regions of interest> to the <Palette> window.
*	moved checkboxes <Apply to Projection window> and <Apply to Volume window> of the <Preferences/Tools/Palette adjustment> to the <Palette> window as the <Apply to window/Shadow projection> and the <Apply to window/Volume> respectively. 
+	added the button <Apply> to the <ROI size> dialog.
+	added the checkbox <Center align> to the <ROI size> dialog.
*	the "Stereology" sections of results of 3D-analysis moved to the end.

[1.16.2.0]
*	changed the sharig mode	of plug-in log-files.
-	fixed issue: the <Attenuation coefficient> tab does not appear in the <Histogram> window  when data was reconstructed by the new NRecon (with typo "Mininum" fix).
-	fixed bug: the <Filtering/Kuwahara> plug-in  crashes when applied (3D space/Round kernel/Radius>1) to a single file.

[1.16.1.0]
-	fixed bug of vv.1.14-1.15: issue of saving htm-files.
-	fixed issue of copying of spr-file when it isn't a bmp-file.
-	fixed issue of the profile line context menu.

[1.16.0.0]
+	added the <Preferences/Plug-Ins/Default tab> option where one can choose the <Collection>/<Task list>/<Internal> or <Last visited> tab as the default.
+	added the checkbox <Preferences/Plug-Ins/Confirm the "Restore dataset" when "Internal/External" tab selected>.

Version 1.15
____________________________________________________________________________________________________

[1.15.12.0]
*	changed the <Density> parameter of <Individual object analysis> (2D and 3D) by the <Mean density>.
+	added the <Maximum density> parameter to results of <Individual object analysis> (2D and 3D).

[1.15.11.0]
-	fixed issue of starting program from command line.

[1.15.10.1]
-	fixed random program crashing when started the <Thresholding> plug-in.

....................................................................................................
[1.15.10.0]
*	!!! Changed API of the plug-in library that fixes compatibillity issue. External plug-ins have to be recompiled with the UNICODE character set and new PlugIn.lib.
+	added the checkbox <Sphere section> to the <Individual 3D object analysis> plug-in dialog. 
	This checkbox modifies the <Save to Clipboard color-coded images/Feature/Orientation> from <Theta> to <Id>.
	The half-shere is divided by the 8 sections and each section has id = int((90-theta)/45))+int(phi/90).
+	added the <Structure thickness> to the <Individual 3D object analysis> dialog and plug-in.
+	added the <Equivalent rod length> to the <Individual 3D object analysis> dialog and plug-in. ERL = (4.0*volume)/(3.1415*thickness^2).
+	added the checkbox <Save overlay images> to the <Save images from ROI> dialog that allows to combine image and ROI to one overlay color image.
-	fixed issue when the "Read error" occured while loading bmp-files as a ROI.

[1.15.9.1]
-	small bugfix of v.1.15.9.0.

[1.15.9.0]
-	fixed bug: the <Reload> plug-in reloads images from multiframe files (isq, dcm, raw, vff) incorrectly when it started in the BatMan. 
+	added the <Major diameter> to the <Individual 3D object analysis>.
+	added the <Save to Clipboard color-coded images/Feature/Major diameter> to the <individual object analysis> plug-in.

[1.15.8.1]
-	fixed issue: on certain PC the <Save from ROI> dialog shows the message "The target directory is read-only, hidden or system".

[1.15.8.0]
+	added the <File/Recent Files> menu item where one can load a recent opened datasets or clear that list of files.
+	added the <Radius of gyration (x/y/polar)> to the <2D analysis> and <Individual 2D object analysis> (https://en.wikipedia.org/wiki/Radius_of_gyration).
+	added the <Moment of inertia (x/y/z/polar)> to the <3D analysis> and <Individual 3D object analysis>.
+	added the <Radius of gyration (x/y/z/polar)> to the <3D analysis> and <Individual 3D object analysis>.
+	added the <Product of inertia (xy/xz/yz)> to the <3D analysis> and <Individual 3D object analysis>.
+	added the <Total orientation (phi/theta)> to the <3D analysis>.
+	added the <Orientation (phi/theta)> to the <Individual 3D object analysis>.
+	added the <Save to Clipboard color-coded images/Feature/Orientation> ( 2D - Phi, 3D - Theta ) to the <individual object analysis> plug-in.
-	fixed bug: The <Individual 3D object analysis> dialog does not remove the first line from selection range when the <Delete> button is pressed.
-	fixed bug: when the unit is not a "pixel" the <Individual 3D object analysis> dialog and plug-in reports wrong <Surface of pores> value.  
-	fixed bug of v.1.15.4-7: wrong interpretation of the flag <Preferences/Advanced/Restrict the thickness calculations to within the VOI only>.
-	fixed bug of v.1.15.4-7: crash when started the <3D analysis/Structure thickness/separation>.

[1.15.7.0]
-	fixed the error with 2D porosity measurement which occurs when the ROI is hollow.
-	fixed bug that may cause crashing of program. 

[1.15.6.0]
-	fixed issue: incorrect display of vertical range of a resized dataset in projection window

[1.15.5.0]
-	fixed bug of vv.1.14.9-1.15.4: issue with opening of isq-files

[1.15.4.0]
+	added the checkbox <Kernel> to the <Thresholding> plug-in. There are available <Square> and <Round> kernels for following operations:
	-	<Adaptive(median-C)>;
	-	<Adaptive(mean-C)>;
	-	<Adaptive (mean of min and max values)>;
	-	<Two-dimensional (Otsu method)>.
+	added the checkbox <Kernel> (<Square> and <Round>) to the <Filtering> plug-in.
*	changed the algorithm of spheres calculation of the <3D analysis/Structure thickness/separation> that produces more accurate results.
	implemented multithreaded version of the <3D analysis/Structure thickness/separation> calculations.


[1.15.3.0]
+	added the <Peripheral bone/object surface> to the summary of 2D analysis.

[1.15.2.2]
-	small fix of v.1.15.2.1.

[1.15.2.1]
-	fixed bug: 2D version of the <Thresholding/Two-dimensional (Otsu method)> canceled when selected checkbox <Inside ROI> and an image has not ROI. 

[1.15.2.0]
*	now the applying of the checkboxes <Preferences/Tools/Palette adjustment/Apply to Projection window> and <Preferences/Tools/Palette adjustment/Apply to Volume window> don't require restart.
+	added the <Conditional mean> in the <Filtering> plug-in. Pixels in a neighbourhood are averaged only if they differ from the central pixel by less than a given threshold.
+	added the values of SD(Tb.Th/St.Th) and SD(Tb.Sp/St.Th) to the summary table results output.
+	added the legend of color-coded images to output of the <Individual object analysis> plug-in.

[1.15.1.0]
+	added the <Middle> z-position at the <Direct> tab of the <Selection> dialog.
+	added the <Upside-Down> button at the <Analytic> tab of the <Selection> dialog. This button inverts an orientation of the reference selection. The inverted reference has anchor icon. 
+	added the <Evaluate> button at the <Analytic> tab of the <Selection> dialog. Use it to calculate the <Offset> and <Height> according actual VOI selection.
*	fields of the <Analytic> tab of the <Selection> dialog will be updated when loaded roi-file containing a reference.

[1.15.0.0]
-	fixed the issue of reading Toshiba DICOM-files. 
-	fixed bug of the <Preferences/Histogram> dialog: the <Cancel> button does not restore parameters changed by the <Calibration> dialog.
-	fixed bug: unused controls shown on the <Preferences/Tools> dialog of the BatMan.
*	end of supporting Windows XP as native platform. This means that only special xp-build of the CTAn can be started under Windows XP.	

Version 1.14
____________________________________________________________________________________________________

[1.14.12.0]
+	added the <Last time of calibration> string to the <Preferences/Histogram> dialog.
-	fixed small issue of <Reset window layout> command.

[1.14.11.0]
-	fixed bug of v.1.14.10.0: checkboxes of <Save bitmaps> plug-in disabled while the <Custom subfolder> unchecked.

[1.14.10.0]
+	added the <Automatic (Ridler-Calvard method)> to the <Thresholding> plug-in.
+	added the <Custom subfolder> checkbox to the <Save bitmaps> plug-in that allows to specify the name of subfolder instead of the default.
+	added the <Hexagonal> kernel to the <Morphological operations> plug-in.

[1.14.9.0]
-	fixed bugs of v.1.14.8: 
	- the <BatMan> does not load roi-file;
	- the <Pause> button was disabled.
+	added the keyboard shortcuts for following commands:
	- <Preferences...>		-	Shift+Enter;
	- <Reset Line to Default>-	Shift+Home;
	- <Selection...>		-	Shift+Tab;
	- <Measure...>			-	Ctrl+Enter;
	- <Reset Window Layout>	-	F12;
	- <Hand mode>			-	Scroll Lock;
+	added selection of additional shape of multiple ROI drawing:
	- <Additional Rectangle> -	Alt+R;
	- <Additional Elliptic>  -	Alt+E;
	- <Additional Polygonal> -	Alt+P;
*	updated the <Keyboard shortcuts> dialog.
 
[1.14.8.1]
+	added the <Combine with raw image> button/command to the <Analysis> window/menu. 
	This command affects checkbox of the <Save the histogram of distribution> dialog too and replaces the <Save color-coded image> by the <Save combined image>.
+	added two checkboxes to the <Preferences/Tools/Palette adjustment> : 
	- <Apply to Projection window>;
	- <Apply to Volume window>;

[1.14.8.0]
+	added an updating of image after execution of each plug-in while the task list is running.
+	added the <Watershed separation> operation in the <Morphological operations> plug-in.
	Note:	This operation works only on the binary images and correctly splits only the convex objects.
			The 3D version requires a huge amount of memory (HD space) - extra up to 7 times of the original data size (up to 10 times in the total including ROI and clipboard).

[1.14.7.0]
+	added a possibility to load image ROI from 8-bit images with reducing color quality.
+	added the <Alias> edit-box to the task list.
*	removed an inplace editing of the aias of task list.
+	added a context menu to the button <Properties> of the <BatMan> dialog. It contains commands:
	- <Properties>;
	- <Change pixel size> can be applyed to current/selected/unselected/all datasets;
	- <Select all>;
	- <Invert selection>.
+	added a possibility to open the context menu <Properties> of the <BatMan> dialog by the right-clicking of mouse.
+	added the scroll bar to the task preview of the <Collection> tab.
*	when a task list was imported from a file the <Export> dialog uses the name of that file as default.
+	added the button <Save> on the <Task list> tab. This button appears when any changes was made ointo the imported task list.
+	added the context menu <Edit task> on the <Collection> tab.

[1.14.6.0]
+	added a checkbox to each dataset in the <BatMan> dialog to include/exclude that dataset from the task processing.
+	added commands <Remove unchecked datasets> and <Remove checked datasets> to the context menu of the <Remove> button of the dataset list of the <BatMan> dialog.
+	added the <Pause> button to the <Processing> dialog. It appears only when the <Collection> or <Task> is started from the <Custom processing>.
-	fixed a bug: alias of the task name disappears when the control focus has changed at beginning of editing.

[1.14.5.0]
+	added to the <BatMan> a possibility to append dataset list to existing one. 
+	added context menus to the buttons <Remove> of the <BatMan> dialog with items:
	- Collection: <Remove task>, <Remove all tasks>;
	- Task list: <Remove plug-in>, <Remove all plug-ins>;
	- Dataset list: <Remove dataset>, <Remove all datasets>. 

....................................................................................................
[1.14.4.1]
+	added to the <BatMan> a possibility to clear task or dataset list by combination of the Ctrl key and the <Remove> button. 
+	added the <Black Body> color palette to the <Palette> dialog.

[1.14.4.0]
-	fixed issue: the <Browse> button of the <Save from ROI...> dialog does not select current folder if it's locating at the "Desktop".
+	added preview of the ISQ-files and the RAW-files (generated by CTAn) in the <File open> dialog.
+	added import of the VFF-files (created by the GE eXplore Locus scanners).	

[1.14.3.2]
+	added to the <Individual object analysis> plug-in a checkbox <Save to Clipboard color-coded images> that allow to generate color-coded images according to object size (ECDa/ESDv).
+	added the <Action> option to the <Reload> plug-in. When the <Clipboard> is selected there are three options to reload it:
	-	<Delete> - clear and free allocated memory;
	-	<Fill by Image>, <Fill by ROI> - allocate the clipboard memory and fill it with initial image/roi data.
-	fixed: wrong position of the main toolbar after applying the <Reset window layout> command.
+	added a parameter symbol line to the report of the <Individual object analysis> plug-in.

[1.14.3.1]
-	fixed an issue of exporting/importing RAW-files.

[1.14.3.0]
-	fixed a bug of v.1.14.2.0: program crashes after pressing the button <Save results> in the <Individual 2D object analysis> dialog.
-	fixed a bug of <Arithmetical operations> plug-in: operation does not take effect when a <Value> is the subtrahend.
+	added multiple ROI drawing:
	-	add free drawn shape (shift+right mouse button);
	-	subtract free drawn shape (ctrl+right mouse button).

[1.14.2.0]
+	added a tab <Collection> at the <Plug-in> window of the CTAn/BatMan where can be collected often used task lists.
*	the <Export task list> dialog has possibility to pin saved task list to the <Collection> tab.
*	changed the default directory for importing/exporting task lists. From now it's defined by <Preferences/Directories/Collection and external plug-ins files>.
*	updated the <Despeckle> and <ROI shrink-wrap> plug-in.

[1.14.1.0]
-	fixed minor bugs.
-	fixed a bug of the <Geometrical transofmations> plug-in: the operations applied to the image are affecting to the region of interest and vice versa.
*	updated Fractal dimension calculation.

[1.14.0.0]
*	Unicode version. 
-	fixed a bug of importing task file: the plug-in configuration cleared when changing the size of data structure. 

Version 1.13
____________________________________________________________________________________________________

[1.13.12.0]
+	added the <Convert to 8 bit> dialog to the procedure of opening isq-files.

....................................................................................................
[1.13.11.0]
-	fixed a bug of the 1.13.8-10 versions: The <Bitwise operations> plug-in in some cases produces wrong results.
+	added the NOR and NAND operations to the <Bitwise operations> plug-in.

[1.13.10.1]
-	fixed a bug of the 1.13.8-10 versions+: crashing when the 3D stereology is started.

[1.13.10.0]
*	changed the naming procedure in the <Save bitmaps>, the <3D analysis> and the <Individual object analysis> plug-ins to reduce the length of automatically generated subfolders.
	Now subfolders in the <Save bitmaps> plug-in named as:
	- VOI - images inside ROI;
	- IMG - only images;
	- ROI - only ROI;
	- CLP = clipboard.
	Subfolders in the <3D analysis> plug-in named as:
	- TBTH - images of trabecular thickness;
	- TBSP - images of trabecular separation.
	Subfolder generated by the <Individual object analysis/2D space> plug-in named as I2D.
*	renamed the <General scientific/Fragmentation index (Fr.I)> to the <General scientific/Surface convexity index (SCv.I)>.
-	fixed bug: the <Individual object analysis/2D space> plug-in applied always to the full images instead of images inside ROI.  
+	added the <Z-position> field to the output of <Histogram/2D space> plug-in. 

[1.13.9.1]
+	added the <Density> parameter to the results of <Individual object analysis> plug-in (2D and 3D).
	The native functions use an original image as the map of density but the plug-in uses the <Clipboard> for that. 
-	fixed bug of v.1.13.8-9: the <Save bitmaps> plug-in saves <Clipboard> images with wrong numbering.

[1.13.9.0]
+	added an operation of copying of the selected ROI to the group of slices, for that:
	1. Select the slice 'A' with the ROI to be copyed;
	2. Press the <Ctrl>+<Shift> key and click the left mouse button at the slice 'B'. The ROI from slice 'A' will be copyed to all slices within the range 'A'-'B'. 
-	fixed: the MIL parameter <Sphere centered at> was shown as the position relatively the VOI.
+	added a possibility to dump the raw data of MIL ( theta, phi, number of intersections ).
-	fixed bug: the <Automatic (Otsu method)> and the <Multilevel (Otsu method)> of the <Thresholding> plug-in in <2D space> show an image inside ROI instead of a full image when the checkbox <Inside ROI> is checked. 
+	added the <Two-dimensional (Otsu method)> to the <Thresholding> plug-in.

[1.13.8.1]
*	changed the original MIL algorithm to remove an instability of results obtained from 3d-volumes with the different proportions of dimensions.
+	added to the <View> menu the command <Reset Window Layout>.

[1.13.8.0]
+	added to the <Plug-Ins> menu/toolbar the command <Clipboard view>. 
	The <Clipboard> is an extra 3D-volume that can be used as storage for intermediate data.
	Initially the <Clipboard> if empty and does not require extra memory. 
	But at the moment of the first use an extra 3D-volume will be allocated in the memory. 
For that:
+	added to the <Bitwise operations> plug-in the <Clipboard> parameter.
+	added to the <Arithmetical operations> plug-in the <Clipboard> parameter.
+	added to the <Geometrical transformations> plug-in the <Clipboard> parameter.
+	added to the <Save bitmaps> plug-in the <Clipboard> parameter.
+	added to the <Reload> plug-in the <Clipboard> parameter. 
	The <Reload> plug-in frees the memory allocated for the <Clipboard>.
+	added to the <Bitwise operations> plug-in an optiion to copy value to <Image>/<Region of Interest>/<Clipboard>.
+	added an exclamation icon for the plug-in loaded with "problem" configuration.
+	added a checkbox <Show this dialog for the next mismatch> to the dialog witch appears when loaded the the plug-in with "problem" configuration.
*	the output of the <Histogram> plug-in aligned for line-by-line comparison.

[1.13.7.0]
*	the checking of the dataset integrity allows the difference of image resolution in one pixel (to avoid problems with loading oversize scanned datasets).

[1.13.6.0]
+	added to the report file an indication of the manual loading/reloading of dataset in the <Custom processing>.

....................................................................................................
[1.13.5.1]
-	fixed bug of vv.1.13.3-1.13.5: blank movie created by the <Export to movie> command.

[1.13.5.0]
-	fixed issue of loading DICOM files that contain an "Icon Image Sequence" tag (0088,0200).
-	fixed bug: if adaptive rendering is chosen in the preferences then the function to make the 3D model at the binary page does not work.

[1.13.4.0]
-	fixed bug of the <Thresholding> plug-in: an inversed prethresholding when background is <Light>.
+	added the <Average principal moment of inertia (min)> to the summary of the <2D analysis>.

[1.13.3.1]
-	fixed bug of v.1.13.3.0: wrong thickness calculation.

[1.13.3.0]
+	added an export of 3D model to the CTVox Mobile data file (VXM-file).
*	renamed the <Export to I3M-file> by the <Export to mobile device>.
*	renamed the <Export to AVI-file> by the <Export to movie>.
*	enabled a <Cancel> button in the progress window when started the <Save Images from ROI>.
*	modified: always create cache images loaded from the removable media or remote(network) drive.
+	added support of the tiff-files with the big endian ("motorola") byte order. 
-	fixed bug: the message <Can't open file ******* for output> appears at the start of a plug-in when single file was opened with the resizing. 
-	fixed bug of vv. 1.12.10-1.13: impossible automatically load isq-file.
+	added <Minimum Feret diameter> to the <Indivadual 2D analysis> dialog and plug-in.

[1.13.2.1]
-	fixed bug of v. 1.13.2.0: the checkbox <Create folder named> of the <Save Images from ROI> dialog displays an empty string "".

[1.13.2.0]
-	fixed issue: on the multimonitor systems application does not restore a previous position when the main monitor is not the left one.
-	fixed bug of the vv.1.12.1.0-1.13.1.1: with an evaluation license the CTAn displays "Demo version" but it is still working as an evaluation.

....................................................................................................
[1.13.1.1]
-	fixed bug: a random color of saturation into the movie created by the <File\Export\to AVI-file" command.

[1.13.1.0]
+	added the option <Area/Volume out of range> for the <Remove black/white speckles> of the <Despeckle> plug-in. 

[1.13.0.0]
+	added the option <Area/Volume within range> for the <Remove black/white speckles> of the <Despeckle> plug-in. 
+	added the number values for the brightness/contrast (or color density) sliders of the <Palette> window. 
+	added the <Biggest inner circle diameter> to the <Individual 2D analysis> dialog and plug-in.

Version 1.12
____________________________________________________________________________________________________

[1.12.12.0]
-	fixed bug: the parameter <Average in 3D> does not reported correctly in the output file.
*	modified the prethreshold functionality of <Thresholding> plug-in: 
	- intensity becomes the 0 when it <= than low threshold level;
	- intensity becomes the 255 when it >= than high threshold level.

[1.12.11.0]
-	fixed bug: the CTAn vv.1.12.1.0-1.12.10.3 with lic-file created after 01.03.2012 does not show correctly lycense type and user name in the <About> dialog.
-	fixed bug: when an adaptive threshold selected in the <Tresholding> plug-in the <2D-analysis> and <3D-analysis> plug-ins report wrong threshold levels.

[1.12.10.3]
+	added the <Average moment of inertia (x)> and the <Average moment of inertia (y)> to the 2D analysis summary results.

[1.12.10.2]
-	fixed issue of <Save *** images> dialogs: the target directory was not valid when the folder attribute has archive bit.

[1.12.10.1]
-	fixed bug: a multi-frame DCM-file was opening as the single-frame.

[1.12.10.0]
+	added the import of DICOM DCM-files to the batch manager.
+	added the <Convert to 8 bit> dialog for custom selecting range of data from 12/16 bit DICOMs to 8 bit.
+	added export images as the TIFF-files to the <Save bitmaps> plug-in and to the following dialogs:
	- <Save images from ROI>;
	- <Save resliced images>;
	- <Save MIP images>;
	- <Save shadow images>.
+	added two buttons <Customize...> on the configuration dialog of the <2D-analysis> plug-in. 
	Dialogs which opened by those buttons allow to include/exclude parameters from the full results table and the summary table.

[1.12.9.0]
+	added to the <Region of interest/Size...> dialog the fields <Left> and <Bottom> where one can specify the ROI position relatively an image origin (according to the <Preferences/General/Image origin> setting).
+	added the import of DICOM DCM-files. Supported only following transfer syntaxes (noncompressed data or RLE-compressed):
	- 1.2.840.10008.1.2
	- 1.2.840.10008.1.2.1
	- 1.2.840.10008.1.2.2
	- 1.2.840.10008.1.2.5


[1.12.8.1]
-	fixed: distorted text in the <Keyboard shortcuts> dialog when used the large system font size (>90 DPI).

[1.12.8.0]
+	added the import of Scanco ISQ-files.
*	changed: the drop-down list <Bacground color> shows original image colors.
*	renamed the "processed images" menu item to the "measurement".
*	renamed the "binary images" menu item to the "binary selection".
-	fixed: the dialogs <Profile/Reslice model>, <Profile/Maximum intensity projection> and <Profile/Shadow projection> save new dataset png-files as bmp-files.
*	redesigned the <Save images from ROI> dialog, added options to automatically create new dataset folder and to restart program with new dataset.
*	redesigned the <Save binary images> dialog and added an option to automatically create new image folder.
*	redesigned the <Save resliced images> dialog and an added option to automatically create new image folder.
*	redesigned the <Save MIP images> dialog and added an option to automatically create new image folder.
*	redesigned the <Save shadow images> dialog and added an option to automatically create new image folder.

[1.12.7.0]
+	added to the <Bitwise operations> plug-in the <Value> argument.
+	added the <Comment> plug-in to add some text to the task list output file.

[1.12.6.0]
+	added the <Geometrical transformations> plug-in with the following options:
	-	<Flip vertical>;
	-	<Flip horizontal>;
	-	<Translate>;
	-	<Rotate by 180>.

[1.12.5.0]
+	added the <Arithmetical operations> plug-in with the following options:
	-	<ADD>;
	-	<SUB>;
	-	<MUL>;
	-	<DIV>.
*	moved operations <MIN> and <MAX> from the <Bitwise operations> plug-in to the <Arithmetical operations> plug-in.

[1.12.4.3]
-	fixed issue: multiple raw-files cannot be opened as a dataset.
+	added the <Scan order> combo box on the <Import raw data> dialog where are available following options:
	-	<Upside-down>	- the raster scan starts from the lower left corner;
	-	<Normal>		- the raster scan starts from the upper left corner;
+	added a checkbox <Normal raster scan order> on the <Save bitmaps> plug-in dialog and <Save Images from ROI> dialog (available only for RAW-data type)

[1.12.4.2]
-	fixed an compatibility issue with ATI/AMD graphics cards: the <Plot> view of the <Volume> window does not react to the changes of color.
*	changed a chamfer mask to obtain more rounded sphere (used in 2D/3D thickness calculations).
+	added extra information about a datset in the header of output file generated by the batch manager.
	An information about ROI file shown only when it was loaded and doesn't modified later. 
+	added a checkbox <Navigates to position of object centroid> at the <Individual 3D analysis> dialog.
*	updated: the <Send image into projection window> command of the <Profile> dialogs now can be applyed to the resized images too. 
	But this "projection" will be temporary used only with an instance of loaded dataset.
	Similar temporary "projection" will be applyed when after pressing the <Send image into projection window> button one responses "No" to the question :"XXX_spr.bmp already exists.\nDo you want to replace it?"

[1.12.4.1]
-	fixed bug of versions 1.12.1- 1.12.4: when the CTAn is starting under full license (generated after the 01.03.2012) the <Preferences/Volume/Maximum dimension of texture> is limited by 128 and the number of datasets in the batch manager is limited by 2.

[1.12.4.0]
+	added the <Plug-Ins> menu.
+	added following commands to <Plug-Ins> dialog and menu:
	-	<Toggle pause state of plug-in>;
	-	<Resume paused task>.
-	fixed bugs of versions 1.12.3.x: 
	- an error message ("float4 parsing error") apears when loading dataset on the laptops with hybrid graphics;
	- a navigation clip plane of the <Volume> window does not updated when the z-position is changing.

[1.12.3.1]
+	added the <Show the results based on direct counting of pixels/voxels> checkbox to the <Preferences/Advanced> dialog.
*	renamed a <Equivalent circle diameter (ECD)> by the <Area-equivalent circle diameter (ECDa)>.
+	added to the <Individual 2D object analysis> dialog and plug-in following parameters:
	-	<Perimeter-equivalent circle diameter>;
	-	<Hydraulic diameter>.
+	added to the <Individual 3D object analysis> dialog and plug-in following parameters:
	-	<Volume-equivalent sphere diameter>;
	-	<Surface-equivalent sphere diameter>;
	-	<Sauter diameter>;
	-	<Sphericity>.
+	added a marker which shows an object (centroid) position of the selected item of the <Individual 3D object analysis>.
-	fixed issues of the <Individual 3D object analysis> dialog:
	-	the <Centroid z> was shown as a relative position from the bottom slice of VOI;
	-	sometimes the <Centroid x> and <Centroid y> don't updated when the <Preferences/General/Image origin> changed. 
*	changed: in the Summary data of the <2D analysis> and <3D analysis> plug-ins the fieds <Lower grey threshold> and <Upper grey threshold> will report the values obtained by the <Thresholding/Global> or the <Thresholding/Automatic (Otsu method)/3D> plug-ins.
		Otherwise they will report "n/a".
*	changed: in the table of results of <2D analysis> plug-in will be included two colums: <Lower grey threshold> and <Upper grey threshold> when the <Thresholding/Automatic (Otsu method)/2D> plug-in was applyed.

[1.12.3.0]
+	added the <Send image into projection window> button to the <Profile/Cut model> dialog.
+	added the <Send image into projection window> button to the <Profile/Reslice model> dialog.
+	added the <Send image into projection window> button to the <Profile/Maximum intensity projection> dialog.
+	added the <Volume/Plot>  menu item and toolbar button.

[1.12.2.0]
+	added the <Send image into projection window> button to the <Profile/Shadow projection> dialog.
	This command creates/overwrites ***_spr.bmp file and open it in the <Shadow projection> window.
	This option is available only if a dataset opened without resizing.
*	renamed the <Projection/Show full area> menu item by <Disable highlighting>.
+	added new menu items to the <Projection> submenu:
	-	<Show full area>;
	-	<Show active area>;
	-	<Show selected area>.
+	added to the <Volume> rendering window:
	-	a possibility to shift a scene using the left mouse button with Ctrl-key;
	-	an indication of shifting of virtual cube;
	-	an indication of zoom factor. 
+	added the <Preferences/Volume/Projection type> combo box with two options: <Perspective> and <Parallel>. 
	They describe the method of mapping three-dimensional object to a viewport.

[1.12.1.0]
+	added the <Average principal moment of inertia (max)> to the summary results of 2D analysis.
*	renamed the <Profile/Apply ROI> to the <Profile/Apply VOI>. Other <Profile> routines consider this option at runtime.
+	added the <Profile/Shadow projection...> menu item and toolbar button.
+	added: the <Region of interest/Size...> dialog shows dimensions of a bounding box in the equivalent values of a default unit.
+	added the <Output color of class thresholding> list box for <Multilevel (Otsu method)> of <Threshold> plug-in.
	There are three options: <Mean intensity in class>, <Threshold level of class> and <Class id>. 

....................................................................................................
[1.12.0.0]
+	added the <Profile> submenu. 
+	added the <Reset to default> menu item to the <Profile> submenu. This command reset the position of profile line to default state.
+	added the <Rotate to...> menu item to the <Profile> submenu( alternative way see in [1.11.4.1] ). This command allows to rotate a profile line to specified angle. 
+	added the <Rotate by...> menu item to the <Profile> submenu( alternative way see in [1.11.4.1] ). This command allows to rotate a profile line by an arbitrary angle. 
+	added: a <Selection> dialog appears when double clicking on the <Selection> pane of the status bar.
+	added the <Zoom...> menu item to the <Image> submenu and image context menu where an exact zoom-factor can be specified. 
+	added: a zoom-slider appears when double clicking on the <Zoom> pane of the status bar.
+	added the <Rotate by...> menu item to the <Region of interest> submenu( alternative way see in [1.11.4.2] ). This command allows to rotate an Image ROI. 
+	added the <Size...> menu item to the <Region of interest> submenu. It also appears when double clicking on the <ROI size> pane of the status bar.
*	renamed the <Size> tab of <Analysis> dialog by <Size (ECD)>. 
+	added the checkbox <Maximum width> on the <MIP> dialog. This option allows to expand the width of a profile line to the maximum possible value in current orientation.
+	added the checkbox <Maximum width> on the <Reslice model> dialog. This option allows to expand the width of a profile line to the maximum possible value in current orientation.

Version 1.11
____________________________________________________________________________________________________

[1.11.10.0]
-	fixed bug: wrong fractal dimension number.

[1.11.9.3]
*	improuved the <Volume/Attenuate> preview.
-	fixed bug: the <Filtering/Kuwahara/3D space> plug-in goes to an infinite loop when the Z-spacing exceed the size of kernel radius. 
-	fixed bug: the reopening of the <Individusl 3D object analysis> dialog does not recalculate values if the several results were deleted from the list of objects.

[1.11.9.2]
+	added the <File/Export/to I3M-file> menu item which can be used to export dataset to the "ImageVis3D Mobile" application (http://itunes.apple.com/us/app/imagevis3d-mobile-universal/id378071694?mt=8).
+	added the <Preferences/Volume/Mobile volume data/Maximum dimension> spin control to limit the size of the exported volume data. 

[1.11.9.1]
+	added a zooming with mouse wheel inside <Volume> window. Avaliable only when the option <Preferences/General/Forward mouse wheel to controls> is active.
*	fixed: inactive toolbar in the undocked (float) window.

[1.11.9.0]
+	fixed issue of outer image surfaces of 3D-model generated by adaptive rendering algorithm with smoothing.
+	added the <Preferences/General/Forward mouse wheel to controls> option that allows to use mouse wheel in all program windows without activate them.

[1.11.8.0]
+	added in the <3D model> plug-in a selection between apply to <Image inside ROI>, <Image> or <ROI>.
+	added in the <3D model> plug-in an option <Smoothing> for the <Adaptive rendering> algorithm.
+	added a <Standard deviation> of the Tb and Sp values in the <3D analysis> results table.

[1.11.7.0]
-	fixed bug: the application hangs when one opens a single image with resizing and starts custom processing.
+	added the new command line key:
	/Ps	-	specifies the new <s> pixel size in mm of image/dataset.
+	added in the <BatMan/Properties> dialog the button <Change> that allow to modify the pixel size of image/dataset. 
+	the <File/Save binary...> command saves images according of the <Preferences/Region of Interest/Save Images> options.
-	fixed bug: wrong z-position numbering inside roi-file when loaded a stack of resized binary images as ROIs.
+	added the checkbox <Save only the current slice> to the <Save> plug-in. This option is avaliable only in the <Custom processing> mode.

[1.11.6.0]
-	fixed bug: in the CTAn the interpolation of ROI becames a dynamic just after ROI loading (this bug does not affect the BatMan).    

[1.11.5.1]
-	fixed bug: the program crashes at the save operations if the pathname of data contains the symbol '%'.

[1.11.5.0]
+	added the export of 3D model to the ASCII STL-file

[1.11.4.2]
+	added rotation of Image ROI. When mouse cursor is over the small circle at the right side of the bounding rectangle 
	one can rightclick mouse to call context menu with command <Rotate by...> or left click and drag mouse to rotate shape. 

[1.11.4.1]
*	increased speed of the <Despeckle> plug-in.
*	increased speed of the <Shrink-wrap> plug-in.
*	increased speed of the <3D analysis/Additional values/Number of objects> calculation.
	implemented multithreaded version of the <Individual 2D object analysis> (native and plug-in).
+	added a tooltip indication of the value of angle while the profile line is changing.
+	added a saving of state of following options:
	-	<Profile/Apply ROI>;
	-	<Histogram/Logarithm scale>;
	-	<Analysis/Area histogram>;
	-	<Analysis/Show absolute values>.
+	added rotation of profile line around his own centroid:
	SHIFT+'+'	- clockwise rotation;
	SHIFT+'-'	- counter clockwise rotation.
	When mouse cursor is over the begin/end of profile line one can rightclick mouse to call context menu with two commands <Rotate profile line to...> and <Rotate profile line by...>. 

[1.11.4.0]
-	fixed bug: the <Individual 2D object analysis> slightly overrates the value of porosity of several objects.

[1.11.3.6]
*	changed the output of the <Save bitmaps> plug-in
*	in the <Preferences/Region of interest> three options were set to default value and were hided:
	<Restore binary selection>(On), <Restore volume of interest>(On), <Prompt on load>(Off).

[1.11.3.5]
-	fixed issue: stl-file fails to load in the Cinema4D.

[1.11.3.4]
-	fixed bug of v.1.11.3.3: zero length of postfix filename when one uses "Open with..." explorer command.

[1.11.3.3]
+	added an option to the <Profile> bar: 
	the previous drawn line returns to the default vertical or horizontal line when doubleclicking the left mouse button on the image.
+	added intermediate levels between the power 2 values in the <Preferences/Volume/Maximum dimension of texture> drop-down list.
*	fixed bug of v.1.11.3.2: division by zero
+	added the <Preferences/General/Filename postfix length> option that specifies the default number of digits in the postfix of filename.
+	added the <#> drop-down list in the <Load image or dataset> dialog that allows to modify the length of the postfix of filename. 
	Initial value of that control will taken from the preferences or from the command line. The command line has higher priority.
	The postfix length does not change till loading of new dataset.

[1.11.3.2]
+	added the <Multilevel (Otsu method)> thresholding (2D/3D) to the <Thresholding> plug-in. 
	The output of plug-in is grayscale image with N+1 colors, where N is number of threshold levels. 

[1.11.3.1]
*	renamed command <ROI view> by <VOI view> in the <Histogram> menu.
*	removed menu item/tab <From Selection> from the <Histogram> menu/dialog.
*	the plotting of histogram updated according to the combination of <VOI view> state and active tab (<From image>/<From dataset>) of <Histogram> dialog .  

[1.11.3.0]
+	added the <Automatic (Otsu method)> thresholding (2D/3D) to the <Thresholding> plug-in.
*	the Otsu thresholding implemented for the <Automatic thresholding> command of the <Histogramm> menu / toolbar.

[1.11.2.0]
+	added <Lower grey threshold> and <Upper grey threshold> in the results text file of individual 2D/3D object analysis (CTAn native dialogs).

[1.11.1.1]
-	fixed bug: the <Individual object analysis> plug-in does not report two 2D parameters: <Equivalent circle diameter> and <Roundness>.

[1.11.1.0]
*	changed SkyScan logo in the <Print Layout> dialog.
-	fixed bug: wrong painting of image when the <Individual 2D object analysis> dialog is opened.
-	fixed bug in the <Configuration> dialog of <3D model> plug-in: 
		when button <Cancel> is pressed the configuration does not restore its previous state. 

[1.11.0.0]
-	fixed bug of versions 1.10.10-12: sometimes the program crashes when clicked <Analysis/Porosity> tab.

Version 1.10 
____________________________________________________________________________________________________

[1.10.12.0]
-	fixed an issue of versions 1.10.2-11: in the BatMan the browsing of ROI files starts from wrong folder

[1.10.11.0]
*	updated the <Thresholding> plug-in: removed pre-smoothing option. It can be done with an internal <Filtering> plug-in.
+	added the checking an integrity of dataset. The nonregular image numbering in the dataset can be a reason of wrong calculations.

[1.10.10.2]
-	fixed an issue of versions 1.10.5-10: the application hangs when a 3D model creation is started in <Adaptive rendering> mode.  

[1.10.10.1]
+	added the checkbox <Add border> on the <Preferences/Region of interest> dialog. 
	This option enables/disables an addition of extra space around image when the <Save Images/Inside accumulated ROI bounds> is selected.
+	added the calculation (based on direct counting of pixels) of the 2D values to the <Analysis> window, <Save 2D analysis results> command and <2D analysis> plug-in:
	- <*Object area>;
	- <*Total ROI area>;
	- <*Percent object area>;
	- <*Average object area>;
	- <*Average object equivalent circle diameter>;
	- <*Area of closed pores>;
	- <*Area of open pore space>;
	- <*Total area of pore space>;
	- <*Closed porosity (percent)>;
	- <*Open porosity (percent)>;
	- <*Total porosity (percent)>.
+	added the calculation (based on direct counting of pixels) of the 2D values to the <Summary 2D data> of the <Save 2D analysis results> command and <2D analysis> plug-in:
	- <*Total VOI volume>;
	- <*Object volume>;
	- <*Percent object volume>;
	- <*Mean total crossectional ROI area>;
	- <*Mean total crossectional object area>;
	- <*Average object area per slice>;
	- <*Average object equivalent circle diameter per slice>;
	- <*Closed porosity (percent)>.
*	impoved the <Individual 2D object analysis>
-	fixed bug of versions 1.10.2-10: the <Major diameter> and <Minor diameter> report wrong results

[1.10.10.0]
	implemented multithreaded version of the <3D analysis/Stereology> calculations
+	added the calculation (based on direct counting of voxels) of the <*Object volume>, <*Volume of pores>, <*Porosity> to the <Individual 3D object analysis> dialog and plug-in.

[1.10.9.0]
*	increased speed of the <3D analysis/Additional values/Fractal dimension> calculation
-	fixed bug of versions 1.10.2-8: the Batch Manager does not open roi-files

[1.10.8.0]
-	fixed bug: the plug-in and native versions of the <Fragmentation index> sometimes report different values
	implemented multithreaded version of the <Individual object analysis> plug-in (3D)
	implemented multithreaded version of the <3D analysis/Basic values> calculations
	implemented multithreaded version of the <3D analysis/Additional values/Structure model index> calculations
	implemented multithreaded version of the <3D analysis/Additional values/Number of objects,..,Euler number> calculations


[1.10.7.0]
-	fixed bug of versions 1.10.5-6: the averaging of dataset in 3D causes the program crash
*	impoved the <Opening by reconstruction> and <Closing by reconstruction> functions in the <Morphological operations> plug-in (grayscale 2D)
	implemented multithreaded version of the <Morphological operations/Erosion> plug-in (grayscale 2D/3D)
	implemented multithreaded version of the <Morphological operations/Dilation> plug-in (grayscale 2D/3D)
	implemented multithreaded version of the <Morphological operations/Opening> plug-in (grayscale 2D/3D)
	implemented multithreaded version of the <Morphological operations/Closing> plug-in (grayscale 2D/3D)
	implemented multithreaded version of the <Morphological operations/Opening by reconstruction> plug-in (grayscale 2D)
	implemented multithreaded version of the <Morphological operations/Closing by reconstruction> plug-in (grayscale 2D)

[1.10.6.0]
-	fixed small issue of popup warning window in the <Profile> dialog
	implemented multithreaded version of the <Thresholding/Adaptive(median-C)> plug-in (2D/3D)
	implemented multithreaded version of the <Thresholding/Adaptive(mean-C)> plug-in (2D/3D)
	implemented multithreaded version of the <Thresholding/Adaptive (mean of min and max values)> plug-in (2D/3D)

[1.10.5.0]
+	the radius of <Gaussian blur> and <Unsharp mask> filters (the <Filtering> plug-in) accepts non-integer values
	implemented multithreaded version of the <Filtering/Gaussian blur> plug-in (2D/3D)
	implemented multithreaded version of the <Filtering/Unsharp mask> plug-in (2D/3D)
	implemented multithreaded version of the <Filtering/Median> plug-in (2D/3D)
	implemented multithreaded version of the <Filtering/Uniform> plug-in (2D/3D)
	implemented multithreaded version of the <Filtering/Kuwahara> plug-in (2D/3D)

[1.10.4.0]
+	added the 3D implementation of <Unsharp mask> filter to the <Filtering> plug-in
+	added the elevation of privelege when it required
-	fixed an issue when program starts under the Guest user account	

[1.10.3.0]
*	the <Smoothing> plug-in renamed to the <Filtering>
+	added the filter <Unsharp mask> (2D version) in the <Filtering> plug-in.	
	"... Typically three settings control digital unsharp masking:
	- Amount is listed as a percentage, and controls the magnitude of each overshoot (how much darker and how much lighter the edge borders become). 
		This can also be thought of as how much contrast is added at the edges. It does not affect the width of the edge rims.
	- Radius affects the size of the edges to be enhanced or how wide the edge rims become, so a smaller radius enhances smaller-scale detail. 
		Higher Radius values can cause halos at the edges, a detectable faint light rim around objects. Fine detail needs a smaller Radius. Radius and Amount interact; reducing one allows more of the other.
	- Threshold controls the minimum brightness change that will be sharpened or how far apart adjacent tonal values have to be before the filter does anything. 
		This lack of action is important to prevent smooth areas from becoming speckled. The threshold setting can be used to sharpen more-pronounced edges, while leaving subtler edges untouched. Low values should sharpen more because fewer areas are excluded. Higher threshold values exclude areas of lower contrast."
	(http://en.wikipedia.org/wiki/Unsharp_masking)

[1.10.2.0]
+	added a X/Y translation of VOI when the Left mouse button with the Ctrl key is pressed inside the fixed shape of ROI.
+	added new type of region of interest - an Image ROI. The Image ROI has a limitation: it should contain less than the 16K fragments.
	(Here the fragment is a continuous part of the image stripe). The Image ROI can be translated, resized and saved into the ROI file. 
+	added the loading of VOI from the set of monochrome bitmap files. 
	This option is available when one changes the type of the file to the <Bitmap files (*.bmp)> on the <Load the regions of interest> dialog.
+	added two options on the <Preferences/Region of Interest> dialog:
	- the <Center bitmaps> defines how should the loaded bitmaps are positioned; 
	- the <Resize bitmaps> enables the resizing of loaded bitmaps according to their pixelsize.
+	added the <Load Image ROI> command to the <Region of Interest> menu
+	added the checkbox <inside VOI> on the <Histogram> plug-in dialog
-	fixed the issue with building a cubic ROI

[1.10.1.6]
-	fixed a bug of formatting output data: the "Number of voxels" in the output histogram can report negative value

[1.10.1.5]
+	added the new command line key:
	/nNUM	-	number of digits in the postfix of the filename (default value is 4)
-	fixed an issue of the writing of png-images under the Windows 7 

[1.10.1.4]
+	added a PNG-file format in the list of supported files
*	changed the mouse button commands for the volume rendering window:
	LEFT		- zoomin/zoomout;
	LEFT+SHIFT	- move clip plane;
	RIGHT		- rotate all;
	RIGHT+CTRL	- rolate clip cube;
+	added the reading of the 24-bit RGB tiff files
-	fixed an issue of the crushing of program when on the Sony Vaio with NVidia GeForce
+	added the calculation of SMI in the <Individual 3D object analysis> dialog and plug-in

[1.10.1.3]
+	added the <MIN> and <MAX> operations in the <Bitwise operations> plug-in
+	added the <Opening by reconstruction> and <Closing by reconstruction> operations (only 2D versions) in the <Morphological operations> plug-in. 

[1.10.1.2]
*	updated the drawing of a polygonal ROI (the dotted line closes a polygon shape).
-	fixed an issue: in several situations the <File/Open> dialog loads the dataset as a single file.
+	added a combo box <Number of orientation> of MIL on the <Advanced> property page of the <Preferences> dialog.
+	added a checkbox <Averaging in 3D> on the <File/Open> dialog. The number of averaged images in 3D can be less than the 2D resize factor and depends of the spacing between images.
+	added an information about resizing of images on the <BatMan/Dataset/Properties> dialog.
+	added the new command line key:
	/v	- use averaging in 3D (applicable only when the "/d" key ("resize by") is specified).
*	updated: the <User defined histogram intervals> menu item and button in <Analysis> panel are available for all types of distribution and have his own independ configurations.
+	added a <Unit of item> combo box on the <User defined histogram intervals> dialog for the <Size>, <Major diameter> and <Perimeter> distributions. There are two options the "um" and the "pixel".
*	updated: when the default ROI type changed and there are not the edited ROIs the ROI shapes update immediately (before to apply the new default ROI one had to press the <Reset all ROI> button).
+	added the <Palette window sliders> radio buttons on the <Preferences/Tools> dialog.
	There are two options: the <Brightness/Contrast> (the style of the previous versions of the CTAn ) or the <Color density range> ( the style similar to presented in the Dataviewer ).
	This options takes effect after the restart of program.

[1.10.1.1]
+	added to the <Measure> tool the <Area> tab that allows to delineate and measure areas with a freehand tool.
+	added the <Apply thresholding> button and menu item in the <Volume> preview window
+	added a button <Create/Update> program shortcuts on the <Preferences/Tools> dialog. 
	It will create/update the User Desktop or the User Start menu shortcus of the CTAn and BatMan.
	The shortcuts will be the different for the 32/64-bit versions of program.

....................................................................................................
[1.10.1.0 Release]
*	fixed a bug of the version 1.10.0.5

[1.10.0.5]
+	added a combo box <Origin of scaling> on the <Volume> property page of the <Preferences> dialog where one can choose the center or the left down point of image as the reference point of the scaling in the <Volume> preview window  
*	fixed an issue: the <Reload> plug-in does not restore initial state of a grayscale/binary flag of the restored data 
*	fixed an issue with volume renering on the ATI Mobility Radeon video card
*	improved the <Morphological operations> <Closing>/<Opening> in 3D space
*	improved the <ROI shrink-wrap> plug-in in 3D space
*	increased a speed of the binary <Morphological operations> in 3D space
*	increased a speed of the <ROI shrink-wrap> plug-in in 3D space

[1.10.0.4]
*	increased a speed of the binary <Morphological operations> in 2D space
*	increased a speed of the <ROI shrink-wrap> plug-in in 2D space

[1.10.0.3]
*	removed the <Save color-coded image...> command from the <Analysis> dialog and menu.
+	added a checkbox <Save color-coded image> in the <Save histogram of distribution> dialog
+	added a <3D space> mode in the <Threshold> plug-in 
+	added a <SWAP> operation in the <Bitwise operations> plug-in

[1.10.0.2]
- fixed bug: the <Individual 3D analysis> crashes when a filename contains symbol '%'

[1.10.0.1]
+	added the <Peripheral VOI surface> and the <Percent intersection surface> parameters at a "Summary 2D data" field of the <2D analysis> (native and plug-in)
+	added the <Save color-coded image...> command to the <Analysis> dialog and menu. It allows to save a single colored image which shown at the image preview window.

[1.10.0.0]
+	added the tab <Volume> at the <Preferences> dialog. 
	This tab is visible only when a video adapter supports the OpenGL 2.0 and higher.
	At this tab can be specified the following options:
	- default preview at loading ( full volume or volume of interest );
	- maximum dimension of the texture ( it depends of video adapter and fixed for demo and evaluation licenses at 128 ) 
	

Version 1.9
____________________________________________________________________________________________________

[1.9.3.4]
*	in the registration dialog one item renamed from the "Registration code" to the "Product ID"

[1.9.3.3]
+	added in the <3D analysis> dialog (native and plug-in) three new items:
	-	<Euler number>;
	-	<Connectivity>;
	-	<Connectivity density>. 

....................................................................................................
[1.9.3.2 Release (Update of 1.9.1.0)]
*	special build without the <Volume> preview window. It's just the fix of bugs of the versions 1.9

[1.9.3.1]
+	added the new command line keys:
	/rROIPATHNAME	- load a roi for dataset
	/tTASKPATHNAME	- load a task file
	/lLISTPATHNAME	- load a list of datasets (applicable only when the "/a" key is specified)
	/c	- close the program when the calculation are finished (applicable only when the "/a" key is specified)
	/a	- autostart the task routines
	/?	- show the command line format

[1.9.3.0]
+	added an <Axes> command to the <Volume> menu and toolbar
-	fixed an issue: rarely the <Custom processing> window does not accept the plug-ins that can work on binary images and shows an error message: "Images must be black and white" 
-	fixed a bug: the <3D analysis> plug-in saves the <Save color-coded images...> for TbTh and TbSp in the opposite sequence
-	fixed a bug: the <3D analysis> plug-in calculates wrong TbTh and TbSp when was selected the partial VOI and the <Preferences/Advanced/Restrict the thickness calculations to within the VOI only> flag is disabled.
	To fix this issue the following plug-ins were modified to proceed a dataset according a VOI restriction:
	- <Thresholding>
	- <Smoothing>
	- <Morphological operations>
	- <Despeckle>
	- <Bitwise operations>

[1.9.2.9]
+	added a <Navigation clip plane> command to the <Volume> menu and toolbar
-	removed a flickering of the list boxes

[1.9.2.8]
+	added a <Clip plane> command to the <Volume> menu and toolbar
*	increased the speed of the volume color transfer function
-	fixed some small bugs
+	added new function in the <Volume> preview: by the double clicking of the right mouse button one can toggle a zoom origin between the center and the left-bottom side of window

[1.9.2.7]
-	fixed a bug: wrong size of images when used the <Save dataset from ROI> command with an inverted ROI

[1.9.2.6]
-	fixed a bug of versions 1.9.2.4-5: invalid HUTAG structure size

[1.9.2.5]
+	added the <Volume> popup menu

[1.9.2.4]
-	fixed an issue: native jpeg resolution tag does not support a dpi > 65535 (~0.39um) and we add the proprietary tag
-	fixed an issue: the resampling of dataset produces files in the opposite sequence
+	added the <Volume> preview vindow (avaliable only for video cards which support a hardware acceleration of Open GL)
	where one can:
	- rotate the volume and the clip box when the Left mouse button is pressed;
	- rotate only the clip box when the Left mouse button and the Ctrl key are pressed; 
	- zoom the volume and the clip box when the Right mouse button is pressed:
		- the moving to center - Zoom out,
		- the moving from center - Zoom in; 
	- select and move the clip plane when the Left mouse button and the Shift key is pressed.
	For the instance the volume cube dimesions are limited by 128x128x128 pixels.

[1.9.2.3]
-	fixed a problem with a window position on the multi-monitor systems
-	fixed a bug of versions 1.9: at the start of program several options of <Preferences/General> did not applied to environment 
-	added in the <MIP> dialog a <Number of projections> edit box
	
[1.9.2.2]
-	fixed an issue with a drag-and-drop of the 16-bit TIFF-files

[1.9.2.1]
*	disabled the SkyScan stamp checking from the TIFF-file loading

[1.9.2.0]
+	added to the <BatMan/Preferences/Tools> an option to use the global CTAn read-only or the local persist BatMan preferences
+	added to the <Measure> tool the <Coordinate> tab that allows to record a xyz positions of clicked points
+	added to the <Despeckle/Sweep> plug-in function the <Remove> combo box where are specified the objects to be deleted
+	added: the <Preferences> dialog goes to the last visited tab in the program process instance
+	added a combo box to the <Preferences/Histogram> dialog which sets the way of the calibration: HU->BMD or AC->BMD 

....................................................................................................
[1.9.1.0 Release]
+	added the export of 3D model to the binary PLY-file (tested with http://www.cyberware.com/products/software/plyview.html)

[1.9.0.0]
+	added the loading of "old" versions of the task lists in the <BatMan>. The message box will appear when the wrong configuration of plug-in has been found and the status of the task item will be marked as "invalid configuration".

Version 1.8
____________________________________________________________________________________________________

[1.8.2.4]
*	the <Length> parameter of the <Individual 2D analysis> renamed to the <Major diameter>
*	the <Breadth> parameter of the <Individual 2D analysis> renamed back to the <Minor diameter> (see v. 1.8.2.3)
*	the <Equivalent circle diameter per slice> parameter of the <2D analysis> renamed to the <Average object equivalent circle diameter per slice>
*	the <Equivalent circle diameter>  parameter of the <2D analysis> renamed to the <Average object equivalent circle diameter>
*	updated the  porosity calculation in the <3D analysis> and <Individual 3D object analysis>
+	added the <Surface of closed pores> to the <3D analysis> dialog (native and plug-in)
+	added the <Surface of pores> column to the <Individual 3D object analysis> dialog

[1.8.2.3]
-	fixed: program does not read the raw data file as the single-volume when the filename postfix contains four digits
-	fixed: the moments of inertia about the axes X and Y were swapped 
+	added the Principal moments of inertia (max and min) in the <2D analysis> and <Individual 2D object analysis> results (native and plug-in)
*	improved the calculation of an object orientation
*	the <Minor diameter> parameter of the <Individual 2D analysis> renamed to the <Breadth>
 
[1.8.2.2]
-	fixed the bug of v. 1.8.2.0-1: the <Save from ROI> function creates the single-volume raw data file with an inverted z-order of images

[1.8.2.1]
-	fixed the bug of v. 1.8.2.0: wrong information saved in the raw data file header file when the ROI size has changed
+	added in the <Import raw data> dialog the new data types:
	-	unsigned short;
	-	signed short;
	-	unsigned long;
	-	signed long;
	-	float;
	-	double.
+	added two new fields <Minor value> and <Major value> in the <Import raw data> dialog where one can cpecify the effective range of the imported raw data

[1.8.2.0]
+	added the possibility to prevent the unwished shut down of computer when the batch processing is in progress
+	added the importing of raw data from the single-volume file or from the set of enumerated files (for the moment supported only the 8-bit data)
+	added the <Raw data file type> to the <Preferences/General> dialog where one can specify the type (extension of file) of raw data 
+	added the <Raw data file type> in the <Save bitmaps> plug-in and the <Save from ROI> dialog. 
	The checkbox <Single file> of those dialogs allows to choose the single-volume output raw data.
+	added the <Text file type> in the <Preferences/General> dialog where one can choose the default file extension of results data. 

[1.8.1.9]
+	added the button <Save profile> to the <Profile> window
+	added the new parameters in the <Individual 2D analysis>:
	-	<Minor diameter>;
	-	<Aspect ratio>.
+	added the new buttons and menu items to the <Region of interest> toolbar and menu:
	-	<Static interpolation> - the old style of interpolation
	-	<Dynamic interpolation> - the current style of interpolation
	-	<Adaptive interpolation> - (new!) the fusion of the previous two styles 

[1.8.1.8]
*	the two <2D analysis> items renamed:
	- from <Average object size> to <Equivalent circle diameter>
	- from <Average object size per slice> to <Equivalent circle diameter per slice>

[1.8.1.7]
+	added the checkbox <Perform the advanced three-dimensional stereology> in the <Preferences/Advanced> dialog
+	added the results of stereology analysis to the output of the <3D analysis> plug-in
+	added in the <2D analysis> dialog (native and plug-in) the new items:
	-	<Number of closed pores>;
	-	<Area of closed pores>;
	-	<Perimeter of closed pores>;
	-	<Area of open pore space>;
	-	<Open porosity(percent)>;
	-	<Total area of pore space>;
	-	<Total porosity(percent)>.
+	added in the <3D analysis> dialog (native and plug-in) the new items:
	-	<Volume of open pore space>;
	-	<Open porosity(percent)>;
	-	<Total volume of pore space>;
	-	<Total porosity(percent)>.
-	fixed the bug of versions 1.8.1.5-6: the incorrect displaying of a grayscale jpeg image when the <RGB to gray> conversion not used
+	implemented the fast toggle back to the <Analysis> view and fast reopen of the <Individual 2D object analysis>
		when the ROI, binary selection and z-position of image have not changed  
+	implemented the fast reopen of the <Individual 3D object analysis> when the binary and VOI selection of image have not changed  
+	added the new parameters in the <Individual 2D analysis>:
	-	<Equivalent circle diameter>;
	-	<Roundness>.

[1.8.1.6]
-	fixed the bug of the version 1.8.1.5: program crashes when open the <Preferences> dialog in the <BatMan> mode

[1.8.1.5]
+	added the item <RGB to gray> in the <Preferences/General> dialog which select the way of converting of the color images to the grayscale

....................................................................................................
[1.8.1.4 Release]
-	fixed the bug: when the datasets loaded had been reconstructed by steps other than step 1, the created 
	MIP image (along profile) does not reflect the step intervals in Z direction and it is vertically compressed

[1.8.1.3]
*	changed the symbol of 2d parameters <Average object size>: "Av.Obj.Le" -> "Av.Obj.Sz";
-	fixed the bug: the program crashes while build the 3D-model by adaptive rendering with grayscale smoothing and binary selection started from zero

[1.8.1.2]
-	fixed the bug: if the program pathname contains the space symbol the dialog with message "X:\XXXXXXX\XXXX contains an incorrect path" is shown while registration
-	fixed the bug of v. 1.8.1.1: wrong format of report line of <3D analysis>

[1.8.1.1]
+	added in the <3D analysis> dialog (native and plug-in) three new items:
	-	<Number of closed pores>;
	-	<Volume of closed pores>;
	-	<Closed porosity (percent)>. 
-	fixed the bug of versions 1.8.0.9 and 1.8.1.0: the <Preferences/General/Notation> item did not save state

[1.8.1.0]
+	added the <Total intersection surface> item in the summary results of <2D analysis>. It does not include the horizontal intersection surfaces

[1.8.0.9]
+	added the <Bitwise operations> plugin that contains <COPY>, <NOT>, <OR>, <AND>, <XOR> and <SUB> operations
+	added in the <Save bitmaps> plug-in an item <Insert scale bar>
+	added in the <3D analysis> plug-in the checkboxes <Save color-coded images...> for TbTh and TbSp
*	removed the <Image copy> operation from the <Shrink-wrap> plug-in. Use for that a <COPY> operation of the <Bitwise operations> plug-in. 
-	fixed the "border" issue of 3D operations of <Shrink-wrap> plug-in when the <stretch over holes> is selected
*	added the item <Notation> in the <Preferences/General> dialog where one can apply <Non-scientific> or <Scentific> notation to numbers
-	fixed the bug: the 64-bits version stops working when builds a huge 3D-model by <Adaptive rendering>  

[1.8.0.8]
-	fixed problem: the video-compression codec locks the avi-file in error case

[1.8.0.7]
+	added in the <Profile> view the moving of a profile line by the combination of <Shift> and arrows keys
+	added in the <ROI> view the moving of a ROI-shape by the arrows keys while the left mouse button is pressed inside ROI
+	added in the <ROI> view the resizing of a ROI-shape by the arrows keys while the left mouse button is pressed inside a corner of ROI bounding rectangle

[1.8.0.6]
-	fixed the bug: <Save bitmaps> plug-in doesn't allow to change the <Apply to> item
-	fixed the bug: the <Adaptive rendering> doesn't accept the <Tolerance> and <Locality> properties
+	added in the <Preferences/Advanced/Adaptive rendering> the <Smoothing> item. It doesn't affect to the plug-ins.

[1.8.0.5]
-	fixed the problem of version 1.8.0.4: wrong drawing of polygon when delete the node.

[1.8.0.4]
-	added the <Edit> command in the <Region of Interest> menu and toolbar. It enables/disables an editing of the polygon nodes

[1.8.0.3]
-	fixed the bugs of versions 1.8.0.0-2: 
	-	wrong report filename in several plug-ins;
	-	small difference of SMI reported by CTan and BatMan  

[1.8.0.2]
-	fixed the bug of versions 1.8.0.0-1: wrong format of report line in the <3D analysis> 

[1.8.0.1]
*	improved the algorithm of the pores calculation in the <Individual 3D object analysis>

[1.8.0.0]
+	added the checkbox <Resize to the ROI bounds> in the <Save bitmaps> plug-in
+	added the <Individual 3D object analysis> comand in the <Analysis> menu
+	added the configuration dialog for the <Individual object analysis> plug-in with a 2D/3D space selection
*	updated the <Histogram/Calibration...> dialog

Version 1.7
____________________________________________________________________________________________________

[1.7.0.7]
+	added a stretching the profile line

[1.7.0.6]
+	added the <Individual 2D analysis> plug-in

....................................................................................................
[1.7.0.5 Release]
-	fixed small bug of version 1.7.0.4

[1.7.0.4]
*	updated resizing mechanism of ROI's (very slow redrawing on some ATI videocards) 

[1.7.0.3]
+	added the shortcut <Alt+Del> for <Set Interpolated ROI>
-	fixed bug: wrong ROI-size when save full size images
-	fixed bug: wrong ROI-shapes when used the z-position slider while the ROI interpolation in progress
-	fixed the bugs in the stereology calculations (thanks to Peter Saparin)

[1.7.0.2]
[1.7.0.1]
-	intermediate builds of program for a test purpose only

[1.7.0.0]
*	small cosmetic changements

Version 1.6
____________________________________________________________________________________________________

[1.6.1.3]
+	added the checkbox <Restrict the thickness calculations to within the VOI only> to the <Preferences/Advanced> dialog
+	added support for jpeg files for 64-bit version of CTAn
*	increased ~ four times the speed of the <Median> filtration in the <Smoothing> plug-in
-	fixed problem: tooltips blocks the real time refreshing of some actions( calculation, animation ... )

[1.6.1.2]
!	the first 64-bit build
+	udded compability for Windows Vista 
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 ATTENTION to the users of Windows Vista!!!	If you have installed the previous (less than 1.6.1.2) version of program under Vista, the new version of program will require the registration authentication.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+	added html-help support
+	added a tool for measuring length of the freehand lines to the <Image preview> window and <Shadow Projection> window.
	Press Shift+left button mouse to activate it. This tool is disabled for the <Image preview> while the ROI editing is active.
+	added the command <Measure...> to the <Image> menu and toolbar. This dialog activates the protractor, line or path tool (depends of selected tab) and allows to collect results and save them as text file.
	When this dialog is active the ROI editing is disabled.

....................................................................................................
[1.6.1.1 Release]
+	added in the <Histogram> plug-in the selection of a calibration unit 
*	in the text report of individual 2d analysis of objects the parameter symbols and units are the separate lines

[1.6.1.0]
+	added the <Preferences> menu item in the <System> menu of the <BATch MANager>
-	fixed: the color of the <Turn Off Button> in the <BATch MANager> does not restore the grayed state after deactivation while batch processing in progress
*	in the <MIP> dialog box it is allowed the number of image slices to be entered by text editing, not only by the spin button
-	fixed: wrong z-position of a model that created by the "Adaptive rendering" from partial VOI
-	fixed: shrink-wrap in 3d with stretch over holes removes the top and bottom slices

[1.6.0.0 Prerelease]

Version 1.5
____________________________________________________________________________________________________

[1.5.1.12]
+	added the <Rotate by angle> edit-box in the <Save from ROI...> dialog. Note that the roi-file will be copied only when the rotation angle equal zero. 

[1.5.1.11]
+	added the dataset log-file copying in the <Save from ROI>, <Save binary> and <Save resliced images>
+	added the checkbox <Copy dataset log file> in the <Save bitmaps> plug-in 
+	added the commands <Set the Top of Selection> (<Ctrl+Home>) and <Set the Bottom of Selection> (<Ctrl+End>)
+	added the checkbox <Overwrite output files> in the <BatMan> dialog

[1.5.1.10]
*	changed the accelerators:
	1. <Set the selection reference> - <Ctrl+Insert> (before it was <Insert>);
	2. <Next Drawn ROI> - <Ctrl+Up> (before it was <+>);
	3. <Previous Drawn ROI> - <Ctrl+Down> (before it was <->);
	4. Image <Zoom In> - <+> (before it was <Right>);
	5. Image <Zoom Out> - <-> (before it was <Left>);
+	added the edit mode when polygonal ROI is selected. One can change the position of shape nodes, remove selected node (<Delete> key) or insert the new one (<Insert> key).
*	changed the reaction to mouse input when polygonal ROI is selected: 
	1. Move a ROI when the left mouse button is pressed inside the shape and cursor is moved (before it was the <SHIFT key+left mouse button>);
	2. Start the free-hand ROI drawing when the <SHIFT+left mouse button> is pressed and cursor is moved (before it was the left mouse button).
+	added: for all ROI shapes it's possible to cancel the drawing/moving/editing procedure and restore the previous shape state if one press the <ESC> key before the release of left mouse button.
-	fixed bug: in the <BATch MANager> the <About> dialog box always shows: "Demo version".
+	added: the call of the <Ctrl+Delete> key will reset the Plolygonal ROI and assign it with its boundaries. 
+	added the command <Cut ROI> to the ROI menu and toolbar.
+	added the keyboard accelerators: 
	1. <ROI Cut> - <Ctrl+X>;
	2. <ROI Copy> - <Ctrl+C>;
	3. <ROI Paste> - <Ctrl+V>;
	4. <Fit to Window> - <*>;
	5. <Actual Size> - <=>;
	6. <Properties> - <Alt+Enter>;
	7. <Top Image> - <Home>;
	8. <Bottom Image> - <End>.
+	added the <Purge outside VOI> menu item in the ROI submenu (<Shift+Del>).
+	added the <Keyboard Shortcuts> dialog that shows the actual keyboard shortcuts (<Alt+F1>)

[1.5.1.9]
*	updated the thickness measurement (sphere fitting) in the 3D analysis: the updated algorithm crosses the VOI boundary to prevent small spheres going into the corners, but takes more calculation time.
+	added the new type of ROI interpolation that will be the default. The previous one is obsolete but will applied when old roi-files is loaded until the button <Reset all ROI> be pressed. 
	The algorithm contains the fine interpolation of non-polygonal ROIs and a little bit more realistic polygonal interpolation.
-	fixed bug: the vertical flip of JPEG-images in the CTAn versions 1.5.1.(6,7,8)

[1.5.1.8]
+	added the volume of objects inside each range of the thickness and separation distributions
+	added <Histogram> plug-in 

[1.5.1.7]
+	added a <3D space> mode in the <ROI shrink-wrap> plug-in 
-	fixed bug: wrong model size when one create a 3D-model from the images with reduced size 

[1.5.1.6]
+	added the HU information tag in the JPEG-file
+	added an JPEG image format in the <Save bitmaps> plug-in 
+	added an JPEG image format in the <Save from ROI> dialog 
+	added an JPEG image format in the <Cut model> dialog 
+	added an JPEG image format in the <Reslice model> dialog 
+	added an JPEG image format in the <Maximal intesity projection> dialog 
+	added the <JPEG quality factor> in the <Preferences/General> dialog
+	added the <Convert to monochrome image> in the <Save bitmaps> plug-in dialog

[1.5.1.5]
-	fixed bug in the <3D model> plug-in: wrong model when the image width is not multiple to four

[1.5.1.4]
+	added a notification icon to the BatMan dialog that appears when the ROI does not loaded
+	added in the BatMan the buttons <Import> and <Export> to load and save a Dataset list 

[1.5.1.3]
*	the density histogram outputs the results text files in the comma-delineated format (it was tab delineated) 
+	added an <Intersection perimeter> in the 2D results	
*	fixed in the 2D analysis summary data the small diveation of Av.Obj.Ar. and Av.Obj.Le.
	The mean values of MMI(polar), Ecc, Tb.Pf and FD calculated by exclusion the slices with zero values.
	Another mean values calculated by using total number of slices.

[1.5.1.2]
-	fixed bug: some 2D analysis summary data (BATMAN version) are WRONG when the VOI is partial

[1.5.1.1]
+	added the moving of poligonal ROI (SHIFT+Left mouse button)
+	added in the ROI bar and menu two items: <Copy ROI> and <Paste ROI>. With this command one can copy any non interpolated ROI and paste it to any image
+	added the <Image inside ROI> button in the <Profile> bar

[1.5.1.0]
+	added the <Maximal Intensity Projection> button to the <Profile> bar.

[1.5.0.4]
+	added in the <Image/Properties> dialog the button <Change> that allow to modify the pixel size of dataset. 

[1.5.0.3]
+	added the <Thickness distribution> and the <Separation distribution> items in the <Print layout> dialog
*	fixed: the wrong bottom palette colour when one change contrast and brightness

[1.5.0.2]
+	the mouse wheel is disabled while drawing the ROI
+	added in the <Despeckle> plug-in report the number of removed speckles

[1.5.0.1]
-	fixed bug: wrong 3D model when one saves a small model in the p3g-format. (The afected models contain near 60000-130000 facets)

....................................................................................................
[1.5.0.0 Release]
+	added <Mean fractal dimension> to the summary of 2D analysis
*	in the <3D model> plug-in the unit is fixed to voxel for the P3G and CTM files

Version 1.4
____________________________________________________________________________________________________

[1.4.1.20]
-	fixed bug: self-closing of the application when in the <Open file> dialog the "Desktop" folder is selected and mouse goes over an bmp-file

[1.4.1.19]
-	fixed bug: crash when load some 16-bit tiff-files

[1.4.1.18]
*	Changed the way (based on perimeter/surface of objects) of the 2D/3D farctal dimension calculation.

[1.4.1.17]
-	fixed bug: the two new 3D functions (<Fractal dimension> and <Number of objects>) do not apply the ROI

[1.4.1.16]
-	fixed small bugs

[1.4.1.15]
+	added <Number of objects> to the <3D analysis> 

[1.4.1.14]
+	added <Fractal dimension> to the <3D analysis> 

[1.4.1.13]
-	fixed bug: incorrect report of TS and BS values in the summary of 2D analysis (non plug-in version).
+	added a <Fractal dimension> item to report of 2D analysis

[1.4.1.12]
+	added the <Hand mode> menu item in the <Image> submenu and image context menu
-	fixed problem with the reported threshold levels in the 2D/3D analysis plug-ins 

[1.4.1.11]
-	fixed problem with naming convention of log-file

[1.4.1.10]
+	added the indication of central point of rectangle, square, elliptic and round ROIs

[1.4.1.9]
+	added a protractor tool to the <Image preview> window and <Shadow Projection> window.
	Press Ctrl+left button mouse to activate it. Switching/releasing a Ctrl key when moving mouse, you can select an active side of the protractor
+	added a <Fractal dimension> to the <Processed images> bar 

[1.4.1.8]
*	implemented a correct <Attenuation coefficient> range for selected part of 16-bit TIF images
+	added a manual calibration of Attenuation in the <Histogram> bar

[1.4.1.7]
+	added in the 3D analysis the calculation of the 3D-centroid
+	added in the summary of 2D analysis the coorinates of 3D-centroid
+	added in 2D analysis an item "Z position"
+	added the global threshold levels to the 2D/3D text report
+	in the <ROI shrink-wrap> plug-in added an <Image copy> mode
+	added the <Attenuation coefficient> tab to the <Histogram> bar

[1.4.1.6]
*	enabled a Kuwahara filter (2D/3D) in the <Smoothing> plug-in

[1.4.1.5]
-	fixed bug in <Reslice model>: wrong bitmaps when the dataset images are not square
-	fixed bug in <3D-model> plug-in: a write error when a reduced dataset is opened
*	in <Preferences/Animation>, the default frame rate for both visualisation and avi is increased from 2 to 15
*	in <Preferences/Region of interest> two selectable options are hided <Aautosave ROI> and <Copy shadow projection> and always are done by default
+	added <Reload> plug-in to reload the dataset or ROI

[1.4.1.4]
+	added 3D-filters in the <Smoothing> plug-in
+	added in tif-file a support of x and y resolution denominators 
+	added in the <Individual 2D object analysis> dialog a <Note> field 
+	added a scrolling of image to center an object selected in the <Individual 2D object analysis> dialog,
	if the zoom factor of an image is less than 1 the image will be displayed in actual size
+	added in the <Print layout.../Layout item/Custom text> the button <Font> to change a font for the user typed text 

[1.4.1.3]
+	3D-transformations added in the <Morphological operations> plug-in
*	optimized the speed of the <Median> filtration in the <Smoothing> plug-in

[1.4.1.2]
+	added in the dialog <Choose Details> a button <Restore Default>
-	fixed problem: a <Save bitmaps> plug-in can't create destination folder if the source folder contains a dot (".") symbol

[1.4.1.1]
+	added in the dialog <Choose Details> buttons <Move Up>,<Move Down>,<Show>,<Hide> and edit box <Width of column>. 
-	fixed problem with small ROI shifting in some datasets

[1.4.1.0]
-	fixed bug: self-closing program when one browses for dataset
-	fixed problem with calculation some parameters of non Skyscan images with zero pixel size ( zero resolution is forced to 96 dpi )
+	added preservation of a condition of the <Create 3D model> dialog 
-	fixed bug: crashing when open a single image for 3D analysis
+	added in the <Individual 2D object analysis> dialog a <Choose Details> button that open a dialog with the same name where one can select the details to display for the results. 
+	added in the <Preferences/Advanced> dialog a checkbox <Allow all users to start the program>. (This option requires the registration authentication under administrative account).
*	removed <Marching Cubes> rendring from <Preferences/Advanced> dialog and <3D-model> plug-in dialog to avoid Marching Cubes rendering
-	fixed bug in <ROI shrink-wrap> plug-in: incorrect <Adaptive> shrink-wrapping when the <Stretch over holes> checkbox is selected
+	added in the <Histogram> bar two edit boxes which allow to change of the thresholds by text editing
+	added two buttons and menu items in the <Histogram> bar and menu. There are the <Halftone view> and the <ROI view>
+	added an item <Apply to:> to <Despeckle> plug-in dialog and a despeckle implementation for ROI
+	added a 3D version of the despeckle operations in the <Despeckle> plug-in

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 ATTENTION !!!	After one starts once this or next versions of program the start of the older versions (less than 1.4.1.0) will require the registration authentication.
				To keep working the Ant-application one must update it to version 2.4.2.0 or high
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[1.4.0.1]
-	fixed: a P3G model origin is always centred, an unit is voxel
....................................................................................................
[1.4.0.0 Release]
-	fixed small bugs of the versions [1.3.3.10] and [1.3.3.11]

Version 1.3
____________________________________________________________________________________________________

[1.3.3.11]
+	added <Tissue surface>, <Mean total crossectional tissue area> and <Mean total crossectional tissue perimeter> in the summary of 2D analysis   
+	added <Tissue perimeter> in the 2D image analysis
 
[1.3.3.10]
-	fixed problem: when one changes view mode the scroll position of image is changed

[1.3.3.9]
-	fixed incorrect marker position of object when the image origin is in the center of image

[1.3.3.8]
-	fixed bug in the <Strech over holes> function of the <ROI shrink-wrap> plug-in

[1.3.3.7]
+	added <Strech over holes> possibility to the <ROI shrink-wrap> plug-in
-	fixed "border effect" in the <Close> transformation of the <Morphological operations> plug-in
+	added in the <Preferences/General> an option for the default orientation of the profile line
-	fixed problem with printing by the Adobe PDF-Writer
-	fixed bug in 2D analysis: in some datasets there is wrong calculation of some object parametes
+	added an <Object Analysis> item in context menu when one presses the right mouse button in the object 
+	added a marker which shows an object (centroid) position of the selected item of the <individual 2D analysis>
+	added <Load> and <Save> commands in the <User defined histogram intervals> dialog
+	added the <ANT-style> item in the <Preferences/Advanced/3D surface construction algorithm>
+	added the buton <Hand mode> in the main toolbar and item of the <View> submenu 
+	added accelerators <Alt+Home> (go to the top of the selection), <Alt+End> (go to the bottom of the selection),
		<Alt+Insert> (go to the selection reference) and <Insert> (set the selection reference)
+	when one loads a ROI in the <Batch Manager> the dialog starts in the folder of dataset 

[1.3.3.6]
-	fixed a problem with updating of input controls of <Selection dialog> when press <Enter> button
-	fixed incorrect auto ROI-file creating when <Save new dataset from ROI>
+	added <ROI shrink-wrap> plug-in
+	added the <Fill-out> mode in the <ROI shrink-wrap> plug-in
+	added the <Adaptive> mode in the <ROI shrink-wrap> plug-in

[1.3.3.5]
-	fixed problem with color picker in the <Save new dataset from ROI> dialog

[1.3.3.4]
-	fixed bug in <individual 2D analysis>: crash with big images

[1.3.3.3]
+	added the colour picker to the <Save new dataset from ROI> dialog
+	added the <Single image>/<Volume of interest> selector in the <Save histogram of distribution> dialog

[1.3.3.2]
+	added the three buttons (<Image view>/<Image inside ROI view>/<ROI view>) in the <Plug-ins> bar
*	redisigned the <Despeckle> plug-in dialog
+	added the area selector (<less than>/<more than>) for <Remove white/black speckles> operation in the <Despeckle> plug-in
+	added the <Remove pores (detected by image/ROI borders)> command in the <Despeckle> plug-in
+	added the <Remove broken pores (detected by image/ROI borders)> command in the <Despeckle> plug-in
+	added the <Remove broken objects (detected by image/ROI borders)> command in the <Despeckle> plug-in
+	added the <Remove inner objects (detected by image/ROI borders)> command in the <Despeckle> plug-in
+	added the <Remove outer objects (detected by image/ROI borders)> command in the <Despeckle> plug-in
+	added the <Sweep> command in the <Despeckle> plug-in: find largest connected binarised object and delete all other objects

[1.3.3.1]
+	added <Lenght distribution> menu item and tab in <Analysis> panel
+	added <Save histogram of distribution > menu item and button in <Analysis> panel to save histograms of distribution in line-by-line text file (with comma delimiter)
+	added <Show absolute values> menu item and button in <Analysis> panel to display absolute values of histogram entries (# or area)
+	added <User defined histogram intervals> menu item and button in <Analysis> panel (only for <Lenght distribution>)
+	added <Major axis-length of inertia>, <Minor axis-length of inertia> and <Length> columns in 2D individual analysis
+	added <Mean Thickness> column in 2D individual analysis
+	added ROI transformations to <Morphological operations> plug-in
+	added the CR to the end of results line when the <2D analysis> plug-in writes a single line-by-line text file
*	3D parameter calculations are preset to 33 marching cubes method
*	increased the number of dicimal places to 3 for mean value of whole spectrum in the <Histogram Bar>
+	added <Mean total crossectional object/bone area> and <Mean total crossectional object/bone perimeter> to Summary 2D analysis
-	fixed problem with the recognition of the inverted ROI
*	increased the number of dicimal places to 5 for all parameters of the 2D and 3D reports
-	fixed "empty data" problem in <3D analysis> plug-in
-	fixed problem with the TBPF

[1.3.3.0]
-	fixed small bug in <3D model> plug-in
+	added information about 3D surface algorithm in the summary and the line-by-line reports of 3D analysis
+	added a menu item <Subtractive> in menu <Region of Interest>

[1.3.2.11]
+	added in <2D analysis> plug-in a possibility to write Summary results of 2D analysis to specified line-by-line file
+	added the volume an surface calculation based on Marching Cubes 33 algorithm (for 3D analysis plug-in as well as for CTAn)
+	added the volume an surface calculation algorithm selection (MC or MC33) to <Preferences/Advanced> and <3D analysis> dialogs 
+	added the <Subtractive ROI> button that inverts all regions of interest
*	enabled <Cancel> button when load ROI. When one press this button all ROIs will be reset to default state

[1.3.2.10]
+	added in 3d thickness/separation data report a column with a single value representing the midpoint of thickness range
+	added <Marching Cubes 33> algorithm witch resolves ambiguous situations of MC.
+	added in <Batch Manager> button to shut down computer when all datasets will be processed

[1.3.2.9]
-	fixed bug: <3D model> plug-in writes STL & CTM upside down models 
+	added p3g-format support to <3D model> plug-in and <Create 3D-model> command

[1.3.2.8]
*	<Selection> dialog goes directly to <Analytic> tab when reference level exists
-	fixed bug: when press ESC or ENTER button a contents of active bar disappears
+	added checked state for <Invert palette> button
-	fixed palette problem when save new file. From now the new file will be saved with original palette.
-	fixed bug: ctm-model has no some facets at the border side of images
-	fixed bug: redundant facets in stl-model when applied the Double-Time cubes algorithm
+	added in <3D analysis> plug-in a possibility to save single text line & text table at the same time
+	added internal <3D model> creator plug-in with MC, DTC and ANT-like algorithms
*	in the dialog box for saving a new ROI dataset the message at the bottom from "fill outside space with white colour" was changed to "..with ambient colour". 

[1.3.2.7]
+	added in <Preferences/Histogram> a button <Calibration> that open a BMD density calibration dialog

[1.3.2.6]
-	fixed small bugs
+	added a line-by-line file selection for <3D-analysis> plug-in

[1.3.2.5]
-	fixed bug: wrong stereology when the ROI is selected

[1.3.2.4]
-	fixed bug: wrong MIL calculation when <Cache image> flag is off

[1.3.2.3]
-	fixed problem with jumping of selected item when Up/Down buttons are pressed
-	fixed stereology problem
-	fixed problem: default thresholding levels can self-change while batch-processing
*	removed from 2D and 3D analysis plug-ins report about thresholding 
+	added an item <Summary results of 2D analysis> in <Print Layout> dialog
+	added the reference indication icon. 
	If dataset has not reference a selected item will be taken as reference in <Selection dialog>.
	If one does select range of images from <Direct> tab of <Selection dialog> or change it manually from
	selection sliders the reference will be removed from dataset.
*	removed the button <Stop> from <Batch Manager>. 
+	added ROI filename in report file
+	added dialog for <2D analysis> plug-in to modify report style
+	added progress bar for individual tasks in <Batch Manager> 
-	fixed bug: button <Properties> in <Batch Manager> sometimes do not shows the right information 
+	added "Crossectional thickness" in the summary data for 2d line-by line analysis
+	added support of the registration password that will be supplied with new lic-files (disabled!)
*	evaluation version limits the number of datasets for processing in batch mode
-	fixed problem with the saving of dataset (binary, resampled and images from roi) with the same prefix name to another folder 

[1.3.2.2]
-	fixed an unexpected dataset reload when change a view mode
*	some small cosmetic changements in results layout

[1.3.2.1]
+	added in submenu <View> a command <Selection...> that opens dialog for VOI selection
+	added in <Selection> dialog the button <Apply> to apply the selection without a dialog closing
+	added the <Analytic> tab to the <Selection> dialog to apply a reference selection
+	added the menu item <Selection reference> in a context menu of the <Dataset> bar to apply a reference selection

....................................................................................................
[1.3.2.0 Release]
*	small cosmetic changements

[1.3.1.9]
-	fixed bug: <Batch manager> crashes when calls some not existing now resources
*	when in <Custom processing> or <Batch Manager> output/report files locked by enother programs (like MS Excel),
	program tryes to create enumerated files like dataset(1).ctan.txt and if it's not possible (protected folder or CD-drive) 
	writes these files in "My Documents/CTAn" folder. The same rules works for Save plug-in.

[1.3.1.8]
+	added Tb.N(rod) and Tb.Sp(rod) calculations and changed correction factors for Tb.Th (2/bs/bv) and Tb.Dm (4/bs/bv)

[1.3.1.7]
*	in 2D results updated a mean area, added a mean size and a mean porosity
*	to indicate an equator ROI in a cube and sphere VOI all ROIs except for equator change its type (cube->rectangle,round->ellipse)
-	fixed bug: wrong a total object surface in Summary 2D data
*	removed 3D surface area factor ( see comments for version [1.2.22.0] )
-	fixed bug: crashing when export to avi a 24-bit bitmap
+	implemented Nomenclature selection in <Preferences/General> 
-	fixed bug: 3D plugin in dialog (non batch) mode takes original images (not from previous plug-in)
-	fixed bug: <Custom processing> not reloads ROIs after they were changed 
-	fixed bug: <Custom processing> sometimes disables the <restore dataset> button when a dataset was changed  
-	fixed bug: when a volume of objects = 0 the 3D calculation stops
*	<Custom processing> writes report and results file called prefix.ctan.log and prefix.ctan.txt,
*	<Batch Manager> writes report and results file called prefix.batman.log and prefix.batman.txt


[1.3.1.6]
-	fixed bug: CTAn falls after a 3D-model creation and CTVol starting
+	added a visualisation of resampled area and an indication of image position inside this area 
*	CTM-file has a centred model with pixel unit
-	Histogram menu is extended by commands whitch was accesible bofore only from buttons from Histogram bar
-	fixed bug: <Save images from ROI> saves wrong palette
*	a text file with histogram has new column <Selected %>
-	fixed some small problems with visualisaton   


[1.3.1.5]
*	updated saving thresholded binary images (old files with the same prefix-name were not removed before writing new files)
+	implemented image reslicing and saving new dataset to disk
+	implemented DA calculations based on model surface (but it is disabled at moment)
+	in the <Image Properties> dialog when a mouse cursor goes over very long pathname the tooltip appears

[1.3.1.4]
*	the button <Analysis/Area histogram> is enabled only for size distribution histogram
+	implemented Double-Time Cubes rendering algorithm (<Preferences/Advanced/3D surface construction algorithm>) which produces two time less facets but with loss of an exactitude of evaluations.
	For this reason the volume calculations continue to be carried out on Marching Cubes algorithm
+	there is an possibility to choose adaptive (in um) or fixed (in pixels) line spacing for MIL/DA calculations in dialog <Preferences/Advanced/MIL line spacing> 

[1.3.1.3]
+	implemented an image caching to speedup read operations (requires an extra disk space)  

[1.3.1.2]
+	implemented DA calculations inside sphere circumscribed around a ROI/VOI
*	!!! for the moment line spacing in DA calculations fixed in 5 pixels

[1.3.1.1]
+	implemented DA calculations inside bounded ROI/VOI cube

[1.3.1.0]
+	possibility to open an autosaved report file in 3D-analysis by pressing the information icon 
*	<Gaussian blur> plug-in renamed to <Smoothing>
+	added to <Smoothing> plug-in median, uniform (mean) and Kuwahara smoothings
-	fixed problem with size adjustment of docked panels
*	MIL/anisotropy analysis returned to original method of a sphere enclosing the whole selected ROI
+	added a stereology analysis report only in main program (this functionality must be activated)

....................................................................................................
[1.3.0.5 Release]
-	fixed bug: diagonal distortion of images in a plugin of morphological operations

[1.3.0.4]
+	selection of the new added dataset in BatMan 
-	fixed bug: the results of 2d-analysis plugin had the reverse order of image numbers
-	fixed bug: incorect (sometimes) calculating of Mean trabecular pattern factor

[1.3.0.3]
- fixed image align problem in internal plug-ins 

[1.3.0.2]
*	removed unused options from <Preferences/Tools>
-	fixed bug in BMD preview
+	added BMD calibration in <Preferences/Histogram>
+	implemented binary images support
+	added a checking of single plug-in before execution
-	fixed some small problems with reading TIF-files
+	added Hounsfield density range calibration in <Histogram> window

[1.3.0.1]
*	removed tab <Preferences/Histogram> and added fast density unit switching in Histogram window
+	added accelerators for dataset tabs:
	Alt+1	-	Raw images
	Alt+2	-	Regions of interest
	Alt+3	-	Binary images
	Alt+4	-	Processed images
	Alt+5	-	Custom processing
+	added possibility to copy shadow projection, when save new dataset from ROI
+	added a checking of plug-ins task queue before execution

[1.3.0.0]
+	added plug-ins managment
+	added batch processing 
+	added selection frame rate for visualization and video-export functions
-	fixed bug: wrong CTM-model position 
+	CTM and STL files have model unit taken from program preferences
+	added possibility to autosave ROI, when save new dataset from ROI (position of new ROIs depends of new size of images)
+	added a selection of intencity range from 16-bits TIF-files
+	added support for new BMP and TIF formats, contained HU-information
+	added in histogram window more statistics about grey/HU values of all selected voxels:
	total number of voxels, standard deviation, standard error of mean, 95% confidence limits (minimum and maximum)
+	added build-in <Threshold> plug-in
+	added build-in <Save bitmaps> plug-in
+	added build-in <2D analysis> plug-in
+	added build-in <3D analysis> plug-in
+	added build-in <Gaussian blur> plug-in
+	added build-in <Morphological operations> plug-in
+	added build-in <Despeckle> plug-in

Version 1.2
___________________________________________________________________________________________________

[1.2.35.3]
-	fixed bug when evaluation key does not work under subversions of program

[1.2.35.2]
+	added in prefereces the possibility of a choice: resize or not images when save new dataset from ROI 

[1.2.35.1]
-	fixed problem when program not started under non-administrative profile

[1.2.35.0 Release]
+	added a calculation of Summary 2D data when save results of 2D analysis
-	fixed problem with permanent recalculation of histograms when after ROI modification one changes VOI selection
-	fixed bug in version 1.2.34 with incorrect loading ROI from file

[1.2.34.0]
+	implemented Demo, Evaluation and Full execution mode 

[1.2.33.0]
+	the WHEEL or UP / DOWN keys change position inside dataset
+	the WHEEL + SHIFT or LEFT / RIGHT keys zoom an image
+	all sliders change his own position by one line when used mouse wheel
-	fixed bug: incorrect interpolation when an empty region drawn on next slice after nonempty ROI 
-	fixed bug inside the <Selection VOI> dialog
+	added a calculation of histogram average value from selected threshold levels
+	added a showing histogram values in preffered units
*	all opening / saving operations don't change default dataset directory
-	fixed bug: a ROI area was calculated by the different algorithm that an image area
+	added possibility to build a cubic/sherical volume of interest from a square/circle ROI taken as equator shape.
	This action also changes the volume of interest selection according figure dimension.
*	corrected a total porosity calculation in <2D image analysis>: the pores inside selected oblect but outside of ROI are ignored
-	fixed bug: sometimes the ROI loses his position inside dataset

[1.2.32.0]
*	new expiration time ( 15 october of 2003 )
+	added in <Individual 2D analysis> and <3D analysis> a possibility to save results as HTML-file 
+	added indication of the start point of profile line
+	possibility to start / stop play images by pressing SPACE button
+	possibility to change the play direction by pressing TAB button
+	possibility to return at the last edited ROI by pressing BACKSPACE button
-	fixed incorect ROI-file loading 

[1.2.31.0]
*	new expiration time ( 1 october of 2003 )
*	some fixes of calculation moments of inertia in <Individual 2D analysis>
+	added in <Individual 2D analysis> calculation of porosity
+	added in 2D image analysis calculation of: 
	-	moments of inertia XX and YY (about centroid of image);
	-	polar moment of inertia (about centroid of image);
	-	product of inertia (about centroid of image);
	-	porosity
	-	orientation
	-	eccentricity
+	added in <2D image analysis> a Porosity distribution histogram
+	added indication of VOI when projection image is selected in the print layout
+	added in <Selection dialog> indication of VOI selection in custom units
+	added possibility to auto save 3D analysis results
+	added in ROI-file information about VOI and binary selection

[1.2.30.0]
+	added in <Individual 2D analysis> calculation of:
	-	moments of inertia XX and YY (about centroid of object);
	-	polar moment of inertia (about centroid of object);
	-	product of inertia (about centroid of object).
+	added a calculation of image centroid in 2D image analysis
+	added a 2 pixel thick extra border around the ROI dataset in <Save binary selection> or <Save dataset from ROI>
-	fixed bug: program crashed when opens <Histogram bar> and it has not enough disk space 

[1.2.29.0]
+	added warning when overwrite an existing dataset from ROI
+	added warning when overwrite an existing dataset from binary selection
*	removed warning "Do you want to replace file?" when <Append to file> checkbox is selected
+	<Save binary selection> writes images only from 
+	<Save dataset from ROI> writes images only from maximal ROI bounding rectangle inside VOI
+	added histogram preview in Hounsfield Units whitch defined in ..._cfg.txt and ..._rec.txt
-	fixed bug in extent calculation

[1.2.28.0]
-	fixed bug: default ROI is always square after reset ROI
-	fixed bug: wrong shear image when cuted rarefied dataset
*	items inside list box does not scrolled while play dataset and just after the stop it scrolls to be sure that selected item is visible

[1.2.27.1]
*	ranges of thickness shifted down by pixel

[1.2.27.0]
+	jumping between edited ROI levels by pressing <+>/<->
*	renamed checkbox in <Save new dataset from ROI> ("solid colour" changed by "white colour")
*	smaler increments for logarithmic histogram curve
*	removed excess spaces between items in 2D text report
*	the reference of selected image always visible in dataset window
-	fixed bug: extra lines in view menu
*	implemented canceling open dataset operation
+	display ROI dimensions in status bar
+	coloured icons for ROI
-	fixed bug: not stored pixel size in Y-dimension
*	new version of thickness calculation

[1.2.26.0]
+	recoded DA calculations

[1.2.25.0]
+	possibility to edit path of 3D-visualisation program
+	added full path item in properties dialog
+	added pixel size in 2D and 3D results
+	reset ROI command is added
+	logarithm histogram scale

[1.2.24.0]
*	corrected version of trabecular thickness calculation
+	added expiration time ( 1 september of 2003 )

[1.2.23.0]
+	added <Profile bar> to preview image colour profile
+	added <Cut model> dialog in <Profile bar> to cut model inside selected VOI by profile line and save result image to bmp-file
+	added possibilty to fill outside ROI space with solid colour when save ROI selection as new dataset

[1.2.22.0]
*	surface area multiplied by 0.95
*	removed empty lines from text file output
*	show BA/TA and BV/TV as "percent value"

[1.2.21.0]
-	fixed bug: sometimes buttons in <Individual 2D analysis> are hidden
-	flicking screen while load ROI from file is avoid

[1.2.20.0]
-	fixed incorrect font size displaying in <Print layout> dialog
+	added Skyscan/custom logo in <Print layout> dialog
+	page header with program version is added in <Print layout> dialog 
-	bug in STL file export function is fixed
-	bug in SMI calculation is fixed
+	export model to CTM file with smoothed normals is added
+	two levels of model resolution is implemented in CTM file
+	implemented canceling 3D model creation
+	default filename to save 2D slice-by-slice data is ending by _2D.txt
-	fixed bug: if images has depth else than 8-bits AVI-export didn't work
+	new command in <3D analysis> dialog allow to save results line by line
+	added <Custom text> item in <Print layout> dialog

[1.2.19.0]
-	fixed bug: program crashes when droping file to shortcut 
+	added print layout dialog. It is optimized for page size less than 350x350 mm ( else it will be drawing problem ).
*	changed output order 3D results
+	added DA calculation by two ways: max_eigenvalue / min_eigenvalue and ( 1 - min_eigenvalue / max_eigenvalue )
*	output eugenvalues normalized by 1.0

[1.2.18.0]
+	implemented canceling accumulative histogram calculation
+	measuring distances in image and projection 
*	some modifications in user interface: 
	-	<Options> renamed to <Preferences> and placed in submenu <File>;
	-	menu item <Temp folder> moved to <Preferences\Directories> dialog;
	-	ROI type buttons organised like one drop-down list button; 
-	fixed painting problems during tooltips movement 

[1.2.17.0]
-	fixed incorrect showing some controls under non XP-style desktop themes
*	shade color is changed in projection image view
+	real time displaying during modification of ROI dimensions ( bounding rectangle ) or position ( offset ) 
+	movie saving with or without compression by installed codecs
-	fixed bug: wrong drawing position of poligonal ROI in scrolling window
*	VOI dialog has in input Z-positions

[1.2.16.0]
+	implemented displaying ROI bounding rectangle
*	ROI box does not shrink after single mouse click on image
+	image background color corresponds to state of selection
+	square and round ROI are added
+	histogram saving as text file is added
+	show selections in rulers

[1.2.15.0]
*	new look of ROI preview when displaying binarised dataset
+	saving a new dataset from VOI+ROI selection as grayscale bmp-files is added
+	added tabs for fast switching distribution histograms
*	changed look of distribution histograms
+	scales for distribution histograms is added
+	scales for shadow projection is added
-	fixed bug of virtual memory usage
+	added tabs for fast switching grey levels histograms
+	scales for grey levels histograms is added
+	implemented image selection from shadow projection window
+	measurements in shadow projection are added

[1.2.14.0]
-	fixed bug in MIL calculation
+	SMI calculation is added
+	the VOI selection dialog is added
+	histogram average value calculation is added
+	columns with pixel size and image size are added in raw images preview
-	fixed bug in TBPf calculations
+	implemented ROI preview when displaying binarised dataset
+	Extent calculation is added in <Individual 2D object analysis>
+	Eccentricity calculation is added in <Individual 2D object analysis>

[1.2.13.0]
+	the Euler number is added in total and individual 2D analysis

[1.2.12.0]
+	the preliminary version of MIL calculations is added

[1.2.11.0]
+	trabecular number (Tb.N.) and percent plate (P.Pl) calculation are added in 3D analysis
*	the choice of a grid for morphological operations is removed from options
*	thickness calculations are more precise
-	fixed bug: wrong original palette preview
*	main window doesn't hide in calculation time
+	<Individual 2D object analysis> and <3D analysis> buttons are added in toolbar

[1.2.10.0]
*	small corrections in output forms like: ROI->VOI, Total Volume->Volume of objects
+	the choice of a grid for morphological operations and evaluations based on them is added
+	indication of cursor position
+	adaptive parameter display precision

[1.2.9.0]
+	unit and origin choice possibility
-	some found bugs in thickness calculation fixed 
+	speedup thickness calculation ( depends from ROI ) 

[1.2.8.0]
*	origin of 3D model shifted to position: size_of_x/2, size_of_y/2, 0 
+	command line for 3D Visualization program has flag with pixel size in um: -p20.5
+	possibility to create 3D model from resampled images with original dimensions

[1.2.7.0]
*	histogram recalculation applies only in accumulative (from selection or from dataset) modes
*	animation shows images in selection range 
-	fixed bug: sometimes in interpolated regions there are small holes
+	possibility to launch 3D Visualization software from specified path

[1.2.6.0]
+	possibility to interrupt 3D calculations
*	memory usage reduced in thickness calculation

[1.2.5.0]
+	new XP-style look (only under Windows XP)
-	fixed potential memory leaks in <Individual 2D object analysis> & <3D analysis> dialogs
	( stream class <fstream.h> changed by stream i/o rutines <stdio.h> ); 
-	fixed bug: reenter to <Individual 2D object analysis> dialog does not refresh all information;
*	from now <Save binary selection> dialog writes files from selected images;
*	writing results of 2D calculations from selected images to file (<Save calculation results> dialog)

[1.2.4.0]
+	progress indication to <Save binary selection> dialog;
+	two-directional sorting to <Individual 2D object analysis> dialog;
+	deletion data from selection to <Individual 2D object analysis> dialog;
*	removed Hasp-key support

